66 datasets found for "Temperature"
-
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
Thermodynamic Data from Unpublished Sources to Support the New Reference Equation of State for Carbon Dioxide
National Institute of Standards and Technology —
During work on the new reference equation of state for carbon dioxide [E.W. Lemmon, A.H. Harvey, and R. Hellmann, NIST Internal Report, to be published in 2025], we... -
Federal
AM Bench 2022 Measurement Results Data: 3D Builds In-situ Thermography and Data Processing Scripts (AMB2022-01)
National Institute of Standards and Technology —
The following data files include in-situ thermographic measurement results, scan strategy, and various additional data associated with laser powder bed fusion (LPBF)... -
Federal
Experimental data sets for viscosity and surface tension of binary mixtures at the temperatures (293.15 to 323.15) K and the pressures (99.325 to 103.325) kPa
National Institute of Standards and Technology —
This is a research data set extracted from NIST Standard Reference Database 103b and contains raw experimental data for viscosity and surface tension of binary mixtures. -
Federal
CMOS Sky130 Primitives measured at cryogenic temperatures
National Institute of Standards and Technology —
Sky130 is an open source complimentary metal oxide semiconductor (CMOS) technology manufactured by Skywater Technology in its facility in Bloomington, Minnesota.... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Data associated with "Primary quantum thermometry of mm-wave blackbody radiation via induced state transfer in Rydberg states of cold atoms"
National Institute of Standards and Technology —
Rydberg states of alkali atoms are highly sensitive to electromagnetic radiation in the GHz-to-THz regime because their transitions have large electric dipole... -
Federal
Calculated values of the second dielectric and refractivity virial coefficients of helium, neon, and argon.
National Institute of Standards and Technology —
Values of second dielectric and refractivity virial coefficients computed, with rigorous accounting for quantum effects, from state-of-the-art pair potentials and... -
Federal
Data for NIST Technical Note: Validation and Optimization with a Vapor Compression Cycle Model Accounting for Refrigerant Thermodynamic and Transport Properties
National Institute of Standards and Technology —
This data set includes (1) Experimental measurements, and (2) Simulation data. The experimental data set shows raw measurements and important calculated parameters.... -
Federal
Dataset presenting improved bandwidth in Rydberg atom electrometry with an optical frequency comb probe
National Institute of Standards and Technology —
Rydberg atom-based receivers of modulated radio frequency (RF) fields are promising systems for measurements. These systems are self-calibrating, widely tunable,...- Three column data: Detuning (MHz), Within EIT Power Spectrum (V/rt(Hz)), Outside EIT Power Spectrum (V/rt(Hz))
- Two column data: Detuning (i.e. relative comb tooth frequency) in MHz, Probe comb tooth transmission in arbitrary units
- TEXT
- 21 column data: Measured data with 95 % error bars given in first 10 columns (including three measurement types), Exponential Fits with 95% confidence bounds given in next 10 columns, and 3 dB point used to define bandwidth of each measurement given in the last column
-
Federal
Measurement of the Behavior of Steel Beams under Localized Fire Exposure
National Institute of Standards and Technology —
A total of nine localized fire tests on steel beams were designed and conducted in the National Fire Research Laboratory as part of its commissioning project,... -
Federal
NIST Phase Diagrams & Computational Thermodynamics of Solders
National Institute of Standards and Technology —
Phase Diagrams and Computational Thermodynamics - Solder Systems predicts melting temperatures and freezing ranges of lead-free solders which are used to remove lead-... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
Aged and unaged flexible unidirectional composite laminate tensile testing for soft body armor applications
National Institute of Standards and Technology —
Flexible Unidirectional (UD) composite laminates are commonly being used for ballistic-resistant body armor. These laminates comprise UD layers, each constructed by... -
Federal
A Dynamic Plasticity Model for Rapidly-Heated 1045 Steel up to 1000 °C
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curves and initial temperatures) for compression experiments performed on annealed 1045... -
Federal
Time Series Data from Sensors in the Duct Above a Kitchen Cooktop During Normal Cooking and Ignition Conditions
National Institute of Standards and Technology —
This data set includes the time series data from 16 electrochemical, optical, temperature and humidity sensors in 60 experiments to characterize the conditions... -
Federal
AM Bench 2022 ASTM E8 Macroscale Tension at Different Strain Rates on As-built IN625
National Institute of Standards and Technology —
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Supporting information to accompany: Super-Ancillary Equations for Cubic Equations of State
National Institute of Standards and Technology —
Supplementary files to accompany the the paper "Super-Ancillary Equations for Cubic Equations of State" of Ian Bell and Ulrich Deiters in Ind. Eng. Chem. Res....
66 datasets found for "Temperature"