-
Federal
Deterministic Move Lists for Federal Incumbent Protection in the CBRS Band
National Institute of Standards and Technology —
The 3.5 GHz citizens broadband radio service (CBRS) band in the U.S. is a key portion of mid-band spectrum shared between commercial operators and existing federal... -
Federal
U.S. population data for human identification markers
National Institute of Standards and Technology —
The primary data consist of allele or haplotype frequencies for N=1036 anonymized U.S. population samples. Additional files are supplements to the associated... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Cure Kinetics of Advanced Epoxy Molding Compound Using Dynamic Heating Scan
National Institute of Standards and Technology —
The data are associated with figures in R. Tao, S. P. Phansalkar, A. M. Forster, B. Han, Investigation of Cure Kinetics of Advanced Epoxy Molding Compound Using... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Digital control of a superconducting qubit using a Josephson pulse generator at 3 K
National Institute of Standards and Technology —
Included here are data used to generate figures from the paper "Digital control of a superconducting qubit using a Josephson pulse generator at 3 K".Abstract: Scaling... -
Federal
Data Supporting the Development of Targeted GC-MS Methods for Seized Drug Analysis
National Institute of Standards and Technology —
This dataset contains information regarding the development of targeted GC-MS methods for forensic seized drug analysis. Included in this dataset are method parameter... -
Federal
AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718
National Institute of Standards and Technology —
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-... -
Federal
Voltammogram Data Associated with Manuscript titled: "Strategies for Assessing the Limit of Detection in Voltammetric Methods: Comparison and Evaluation of Approaches."
National Institute of Standards and Technology —
This data set contains the instrument files (.pssession) as well as the extracted voltammogram data as (.xlsx) for voltammetric analysis of lead, diphenylamine,... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Dataset for optical coherence tomography for label-free cell viability measurements in 3D tissue engineering scaffolds
National Institute of Standards and Technology —
In the field of tissue engineering, 3D scaffolds and cells are often combined to yield constructs that are used as therapeutics to repair or restore tissue function... -
Federal
Dataset of channels and received IEEE 802.11ay signals for sensing applications in the 60GHz band
National Institute of Standards and Technology —
The dataset can be used to develop and test algorithms for communication and sensing in the 60GHz band. The dataset consists of synthetically generated indoor mm-wave... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Dataset for Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment
National Institute of Standards and Technology —
This data is associated with the manuscript titled Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment. The abstract of... -
Federal
SRM 2197, Lot LL-198 Low-Energy Charpy V-Notch Specimens (Self-Verification, 2 mm Striker)
National Institute of Standards and Technology —
NIST self-verification Charpy specimens, such as from lot LL-198 here considered, are used by companies around the world to perform an indirect verification of a... -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #2)
National Institute of Standards and Technology —
The National Institute of Standards and Technology conducted a series of large compartment fire tests to investigate the behavior and fire-induced failure mechanisms... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Data set for Amontons-Coulomb-like slip dynamics in acousto-microfluidics
National Institute of Standards and Technology —
This data set contains the data/information used to plot the graphs published in the 2022 Nat. Comm. article (titled "Amontons-Coulomb-like slip dynamics in acousto-... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Data set of Flow Resistance Measurements of Vegetation
National Institute of Standards and Technology —
This data set reports measurements of the drag coefficient and geometric parameters of different types of vegetation. The vegetation chosen for this work was a Bakers...