-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
LTE and Wi-Fi coexistence measurement data
National Institute of Standards and Technology —
This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-... -
Federal
The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI Units
National Institute of Standards and Technology —
Recommended values are provided for chemical thermodynamic properties of inorganic substances and for organic substances usually containing only one or two carbon... -
Federal
Thermal Drift Monitoring Experiment 01
National Institute of Standards and Technology —
An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Process and robot data from a two robot workcell representative performing representative manufacturing operations.
National Institute of Standards and Technology —
This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-... -
Federal
Linear Axis Testbed at IMS Center - Run-to-Failure Experiment 01
National Institute of Standards and Technology —
A linear axis testbed at the Center for Intelligent Maintenance Systems (IMS Center) at the University of Cincinnati was run to failure (the detection of backlash)... -
Federal
Complex Document Information Processing (CDIP) dataset
National Institute of Standards and Technology —
This dataset is called the "IIT CDIP collection". "CDIP" stands for "Complex Document Information Processing" and "IIT" stands for "Illinois Institute of Technology"... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
Segmentation of lipid nanoparticles from cryogenic electron microscopy images
National Institute of Standards and Technology —
Lipid nanoparticles (LNPs) were prepared as described (https://doi.org/10.1038/s42003-021-02441-2) using the lipids DLin-KC2-DMA, DSPC, cholesterol, and PEG-DMG2000... -
Federal
3D shape and size data for 10084 and 14163 lunar regolith particles
National Institute of Standards and Technology —
This database contains 3D shape and size data for 10084 (Apollo 11) and 14163 (Apollo 14) real lunar regolith particles, along with STL files for the approximately... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Smartphone Data for Development of Indoor Localization Apps
National Institute of Standards and Technology —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... -
Federal
High-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parameters
National Institute of Standards and Technology —
This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion... -
Federal
SHREC'11 Track: Shape Retrieval on Non-rigid 3D Watertight Meshes
National Institute of Standards and Technology —
Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing... -
Federal
Automated particle analysis (SEM/EDS) data from samples known to have been exposed to gunshot residue and from samples occasionally mistaken for gunshot residue - like brake dust and fireworks.
National Institute of Standards and Technology —
Automated particle analysis (SEM/EDS) data from samples known to have been exposed to gunshot residue and from samples occasionally mistaken for gunshot residue -... -
Federal
Three dimensional shape and size X-ray CT database for 1.1 million particles from 17 different lunar regolith simulants
Department of Commerce —
Lunar regolith simulants are manufactured in order to provide a higher volume, much less expensive and more available source of material, compared to real lunar... -
Federal
MAM Consortium Interlaboratory Study Raw Data
National Institute of Standards and Technology —
These LC-MS and LC-MS/MS raw data were collected for purposes of an interlaboratory study evaluating the multi-attribute method (MAM). Tryptic digests of native...