-
Federal
Data for "Distributed contactless interconnects for millimeter-wave heterogeneous integration"
Department of Commerce —
Included here are figures and other relevant data from the paper "Distributed contactless interconnects for millimeter-wave heterogeneous integration", submitted to... -
Federal
Hurricane Maria Wind-Field Model for Puerto Rico
National Institute of Standards and Technology —
This data comprises the wind-field model for Hurricane Maria in Puerto Rico, which occurred in 2017. Wind speeds are reported as equivalent three-second peak gust... -
Federal
Single-track laser scan cross-sectional micrographs on IN625 and IN718 bare plates with melt pool depth and width measurements
National Institute of Standards and Technology —
Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power,... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
Department of Commerce —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Data for manuscript: Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers
National Institute of Standards and Technology —
Experimental and modeling data for manuscript "Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers" by Chad Ropp, Dhriti Maurya, Alexander... -
Federal
In-situ Raman spectra of indented fused silica
National Institute of Standards and Technology —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
High-Rate Volumetric Particle Tracking Microscopy (HR-VPTM) validation data
Department of Commerce —
To verify and validate the HR-VPTM technique, both synthetic images and gels with embedded particles undergoingcontrolled deformations were used to compared known and... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
National Institute of Standards and Technology —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
Department of Commerce —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Code for SerialTrack-XR particle tracking
National Institute of Standards and Technology —
This repository contains scripts for running a custom implementation of "SerialTrack" designed for 2D X-ray projection images taken during in situ micro-X-ray... -
Federal
Data for "A distributed theory for contactless interconnects at terahertz frequencies"
Department of Commerce —
Included here are figures and other relevant data from the paper "A distributed theory for contactless interconnects at terahertz frequencies". Abstract: Here we test... -
Federal
Data for "A distributed theory for contactless interconnects at terahertz frequencies"
National Institute of Standards and Technology —
Included here are figures and other relevant data from the paper "A distributed theory for contactless interconnects at terahertz frequencies". Abstract: Here we test... -
Federal
Data for "Distributed contactless interconnects for millimeter-wave heterogeneous integration"
National Institute of Standards and Technology —
Included here are figures and other relevant data from the paper "Distributed contactless interconnects for millimeter-wave heterogeneous integration", submitted to... -
Federal
Single-track laser scan cross-sectional micrographs on IN625 and IN718 bare plates with melt pool depth and width measurements
Department of Commerce —
Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power,... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
Department of Commerce —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Enhanced durability of CNT based hierarchical composites subjected to accelerated aging environments.
National Institute of Standards and Technology —
Flexure testing, SEM, FTIR_ATR, Acoustic testing, Electrical testing, XRD, DSC, TGA -
Federal
Data for Advanced Metrology Suite for Linking Residual Stress to FundamentalProperties of Thermoset Packaging Materials
Department of Commerce —
This repository contains data generated to support and ECTC 2025 conference manuscript titled "Advanced Metrology Suite for Linking Residual Stress to Fundamental... -
Federal
High-Rate Volumetric Particle Tracking Microscopy (HR-VPTM) validation data
National Institute of Standards and Technology —
To verify and validate the HR-VPTM technique, both synthetic images and gels with embedded particles undergoingcontrolled deformations were used to compared known and... -
Federal
In-situ Raman spectra of indented fused silica
Department of Commerce —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM...