-
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
Observation of Asymmetric Sideband Generation in Strongly-driven Rydberg Atoms
National Institute of Standards and Technology —
Improving the bandwidth of Rydberg atom-based receivers is an ongoing challenge owing to the long-lived Rydberg state lifetimes that limit the refresh rate of ground... -
Federal
Complex Document Information Processing (CDIP) dataset
National Institute of Standards and Technology —
This dataset is called the "IIT CDIP collection". "CDIP" stands for "Complex Document Information Processing" and "IIT" stands for "Illinois Institute of Technology"... -
Federal
3D shape and size data for 10084 and 14163 lunar regolith particles
National Institute of Standards and Technology —
This database contains 3D shape and size data for 10084 (Apollo 11) and 14163 (Apollo 14) real lunar regolith particles, along with STL files for the approximately... -
Federal
Segmentation of lipid nanoparticles from cryogenic electron microscopy images
National Institute of Standards and Technology —
Lipid nanoparticles (LNPs) were prepared as described (https://doi.org/10.1038/s42003-021-02441-2) using the lipids DLin-KC2-DMA, DSPC, cholesterol, and PEG-DMG2000... -
Federal
Mapping of NIST Cybersecurity Framework Subcategories to Threat Scenarios from the National Electric Sector Cybersecurity Organization Resource (NESCOR) Electric Sector Failure Scenarios and Impact Analyses - Version 3.0
National Institute of Standards and Technology —
This document identifies the NIST Cybersecurity Framework Subcategories that map closely to the potential mitigations within Advanced Metering Infrastructure (AMI),... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
NIST Fingerprint Registration and Comparison Tool (NFRaCT)
National Institute of Standards and Technology —
The NIST Fingerprint Registration and Comparison Tool (NFRaCT) is a cross-platform GUI application which allows a user to load a pair of fingerprint images, find... -
Federal
Microplastic and nanoplastic chemical characterization by thermal desorption and pyrolysis mass spectrometry with unsupervised machine learning
National Institute of Standards and Technology —
This data publication contains the mass spectrometry chemical characterization of microplastic and nanoplastic chemical analysis. The data from this study includes... -
Federal
Data from: NIST Properties of Molten Salts Database (formerly SRD 27)
National Institute of Standards and Technology —
NIST distributed the NIST Properties of Molten Salts Database from 1990 to 2004. As part of the NIST Standard Reference Data Program, the database was designated as... -
Federal
Using Open-Path Dual-Comb Spectroscopy to Monitor Methane Emissions from Simulated Grazing Cattle
National Institute of Standards and Technology —
Data published in the paper "Using Open-Path Dual-Comb Spectroscopy to Monitor Methane Emissions from Simulated Grazing Cattle". A controlled methane release... -
Federal
High-volume, label-free imaging for quantifying single-cell dynamics in iPSC colonies
National Institute of Standards and Technology —
This collection is comprised of multiple sets of experiments involving iPSCs with varying dosages of fluorescent light excitation. Samples were imaged every 2 minutes... -
Federal
Analytical Performance of Direct-to-Consumer Gut Microbiome Testing Services
National Institute of Standards and Technology —
This repository contains raw and intermediate data files as well as analysis code from the manuscript "Evaluating the Analytical Performance of Direct-to-Consumer Gut... -
Federal
Hurricane Maria Wind-Field Model for Puerto Rico
National Institute of Standards and Technology —
This data comprises the wind-field model for Hurricane Maria in Puerto Rico, which occurred in 2017. Wind speeds are reported as equivalent three-second peak gust... -
Federal
Automated particle analysis (SEM/EDS) data from samples known to have been exposed to gunshot residue and from samples occasionally mistaken for gunshot residue - like brake dust and fireworks.
National Institute of Standards and Technology —
Automated particle analysis (SEM/EDS) data from samples known to have been exposed to gunshot residue and from samples occasionally mistaken for gunshot residue -... -
Federal
NIST DART-MS Forensics Database (is-CID)
National Institute of Standards and Technology —
The NIST DART-MS Forensics Database is an evaluated collection of in-source collisionally-induced dissociation (is-CID) mass spectra of compounds of interest to the... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
OpenFOAM simulations of filament fusion in embedded 3D printing
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. However, moving the nozzle near an existing...