-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Simulated X-ray computed tomography (XCT) and ground truth images of cylindrical sample with randomly distributed spherical pores
National Institute of Standards and Technology —
X-ray computed tomography (XCT) datasets with known ground truth pores were developed using realistic XCT simulation. Non-overlapping spherical pores of varying sizes... -
Federal
The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI Units
National Institute of Standards and Technology —
Recommended values are provided for chemical thermodynamic properties of inorganic substances and for organic substances usually containing only one or two carbon... -
Federal
Complex Document Information Processing (CDIP) dataset
National Institute of Standards and Technology —
This dataset is called the "IIT CDIP collection". "CDIP" stands for "Complex Document Information Processing" and "IIT" stands for "Illinois Institute of Technology"... -
Federal
High-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parameters
National Institute of Standards and Technology —
This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion... -
Federal
Process and robot data from a two robot workcell representative performing representative manufacturing operations.
National Institute of Standards and Technology —
This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-... -
Federal
Segmentation of lipid nanoparticles from cryogenic electron microscopy images
National Institute of Standards and Technology —
Lipid nanoparticles (LNPs) were prepared as described (https://doi.org/10.1038/s42003-021-02441-2) using the lipids DLin-KC2-DMA, DSPC, cholesterol, and PEG-DMG2000... -
Federal
LTE and Wi-Fi coexistence measurement data
National Institute of Standards and Technology —
This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
U.S. population data for human identification markers
National Institute of Standards and Technology —
The primary data consist of allele or haplotype frequencies for N=1036 anonymized U.S. population samples. Additional files are supplements to the associated... -
Federal
Challenging Medically-Relevant Genes Benchmark Set
National Institute of Standards and Technology —
CMRG v1.00 of a small variant benchmark and structural variant benchmark focused on 273 challenging medically relevant genes for the Genome in a Bottle (GIAB) sample... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Overhang Part X4
National Institute of Standards and Technology —
This dataset includes files from the experiment titled 'OverhangPartX4' pertaining to a three-dimensional (3D) additive manufacturing (AM) build performed on the... -
Federal
Thermal Drift Monitoring Experiment 01
National Institute of Standards and Technology —
An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A... -
Federal
Atomic Model Structure of Intact Monoclonal Antibody Reference Material 8671 (NISTmAb)
National Institute of Standards and Technology —
As monoclonal antibodies have become a vital resource in medicine, knowledge of their complex molecular structures has increased in importance. Thousands of Fab and... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
3D shape and size data for 10084 and 14163 lunar regolith particles
National Institute of Standards and Technology —
This database contains 3D shape and size data for 10084 (Apollo 11) and 14163 (Apollo 14) real lunar regolith particles, along with STL files for the approximately... -
Federal
Microplastic and nanoplastic chemical characterization by thermal desorption and pyrolysis mass spectrometry with unsupervised machine learning
National Institute of Standards and Technology —
This data publication contains the mass spectrometry chemical characterization of microplastic and nanoplastic chemical analysis. The data from this study includes... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
In-situ Raman spectra of indented fused silica
National Institute of Standards and Technology —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-...