- 
  
    Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... - 
  
    Federal
The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI Units
National Institute of Standards and Technology —
Recommended values are provided for chemical thermodynamic properties of inorganic substances and for organic substances usually containing only one or two carbon... - 
  
    Federal
Thermal Drift Monitoring Experiment 01
National Institute of Standards and Technology —
An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A... - 
  
    Federal
Linear Axis Testbed at IMS Center - Run-to-Failure Experiment 01
National Institute of Standards and Technology —
A linear axis testbed at the Center for Intelligent Maintenance Systems (IMS Center) at the University of Cincinnati was run to failure (the detection of backlash)... - 
  
    Federal
LTE and Wi-Fi coexistence measurement data
National Institute of Standards and Technology —
This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-... - 
  
    Federal
Challenging Medically-Relevant Genes Benchmark Set
National Institute of Standards and Technology —
CMRG v1.00 of a small variant benchmark and structural variant benchmark focused on 273 challenging medically relevant genes for the Genome in a Bottle (GIAB) sample... - 
  
    Federal
SHREC'11 Track: Shape Retrieval on Non-rigid 3D Watertight Meshes
National Institute of Standards and Technology —
Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing... - 
  
    Federal
Dataset of channels and received IEEE 802.11ay signals for sensing applications in the 60GHz band
National Institute of Standards and Technology —
The dataset can be used to develop and test algorithms for communication and sensing in the 60GHz band. The dataset consists of synthetically generated indoor mm-wave... - 
  
    Federal
High-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parameters
National Institute of Standards and Technology —
This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion... - 
  
    Federal
Dynamic Polymer Annotated Library
National Institute of Standards and Technology —
Dynamic Polymer Annotated Library (DPAL)DPAL is an annotated library of peer-reviewed research that aims to: (1) Fill a knowledge gap in the materials science field... - 
  
    Federal
Process and robot data from a two robot workcell representative performing representative manufacturing operations.
National Institute of Standards and Technology —
This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-... - 
  
    Federal
Dataset for Establishing a Reference Focal Plane Using Machine Learning and Beads for Brightfield Imaging
National Institute of Standards and Technology —
This dataset consists of sets of images corresponding to the data sets 1-8 described in Table 1 in the manuscript "Establishing a Reference Focal Plane Using Machine... - 
  
    Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... - 
  
    Federal
Segmentation of lipid nanoparticles from cryogenic electron microscopy images
National Institute of Standards and Technology —
Lipid nanoparticles (LNPs) were prepared as described (https://doi.org/10.1038/s42003-021-02441-2) using the lipids DLin-KC2-DMA, DSPC, cholesterol, and PEG-DMG2000... - 
  
    Federal
MAM Consortium Interlaboratory Study Raw Data
National Institute of Standards and Technology —
These LC-MS and LC-MS/MS raw data were collected for purposes of an interlaboratory study evaluating the multi-attribute method (MAM). Tryptic digests of native... - 
  
    Federal
Smartphone Data for Development of Indoor Localization Apps
National Institute of Standards and Technology —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... - 
  
    Federal
JRES-NIST XML Dataset
National Institute of Standards and Technology —
The dataset consists of full-text XML files of 1,498 articles of the Journal of Research of the National Institute of Standards and Technology, published between... - 
  
    Federal
Copper k-alpha xray emission spectrum
National Institute of Standards and Technology —
This data set consist of two representations of the electron-induced copper k-alpha x-ray emission spectrum. One file contains rebinned counting data, and is close to... - 
  
    Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Overhang Part X4
National Institute of Standards and Technology —
This dataset includes files from the experiment titled 'OverhangPartX4' pertaining to a three-dimensional (3D) additive manufacturing (AM) build performed on the...