-
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
SysML Model Libraries Supporting Discrete Event Logistics Systems (DELS) Models
National Institute of Standards and Technology —
System models and model-based engineering methods have the promise of transforming the way that industrial engineers interact with production and logistics systems.... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
3D shape and size data for 10084 and 14163 lunar regolith particles
National Institute of Standards and Technology —
This database contains 3D shape and size data for 10084 (Apollo 11) and 14163 (Apollo 14) real lunar regolith particles, along with STL files for the approximately... -
Federal
NIST DART-MS Forensics Database (is-CID)
National Institute of Standards and Technology —
The NIST DART-MS Forensics Database is an evaluated collection of in-source collisionally-induced dissociation (is-CID) mass spectra of compounds of interest to the... -
Federal
Automated particle analysis (SEM/EDS) data from samples known to have been exposed to gunshot residue and from samples occasionally mistaken for gunshot residue - like brake dust and fireworks.
National Institute of Standards and Technology —
Automated particle analysis (SEM/EDS) data from samples known to have been exposed to gunshot residue and from samples occasionally mistaken for gunshot residue -... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Three dimensional shape and size X-ray CT database for 1.1 million particles from 17 different lunar regolith simulants
Department of Commerce —
Lunar regolith simulants are manufactured in order to provide a higher volume, much less expensive and more available source of material, compared to real lunar... -
Federal
OpenFOAM simulations of filament fusion in embedded 3D printing
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. However, moving the nozzle near an existing... -
Federal
TRNSYS Building Energy Simulation Model for a Net-Zero Energy Building with a Ground-Source Heat Pump
Department of Commerce —
This TRNSYS building energy simulation model is developed for a Net-Zero Energy Building (NZEB) located on the National Institute of Standards and Technology (NIST)... -
Federal
Data to accompany "Low Electron Beam Energy X-ray Microanalysis: The Adventure Continues!"
National Institute of Standards and Technology —
EDS spectra measured at E0 = 5 keV for 75 materials are provided along with the standards used for quantification with the NIST DTSA-II software for electron-excited... -
Federal
NIST Fingerprint Registration and Comparison Tool (NFRaCT)
National Institute of Standards and Technology —
The NIST Fingerprint Registration and Comparison Tool (NFRaCT) is a cross-platform GUI application which allows a user to load a pair of fingerprint images, find... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
SHREC'14 Track: Extended Large Scale Sketch-Based 3D Shape Retrieval
National Institute of Standards and Technology —
The objective of SHREC'14 Track is to evaluate the performances of different sketch-based 3D model retrieval algorithms using a large scale hand-drawn sketch query... -
Federal
Three dimensional shape and size X-ray CT database for 1.1 million particles from 17 different lunar regolith simulants
National Institute of Standards and Technology —
Lunar regolith simulants are manufactured in order to provide a higher volume, much less expensive and more available source of material, compared to real lunar... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different...