80 datasets found for "博彩导航✅澳门葡京赌场官方网站-网址【079.one】㊙️最火爆PG电子超高爆奖率，注册即送38元.pJjQWbrLMxRC"
-
Federal
Forecasting demand data for critical materials
National Institute of Standards and Technology —
Clean energy technologies (e.g., solar, wind, EVs) are vital in our transition to a decarbonized energy grid. Many clean energy technologies rely on critical... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Cure Kinetics of Advanced Epoxy Molding Compound Using Dynamic Heating Scan
National Institute of Standards and Technology —
The data are associated with figures in R. Tao, S. P. Phansalkar, A. M. Forster, B. Han, Investigation of Cure Kinetics of Advanced Epoxy Molding Compound Using... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Digital control of a superconducting qubit using a Josephson pulse generator at 3 K
National Institute of Standards and Technology —
Included here are data used to generate figures from the paper "Digital control of a superconducting qubit using a Josephson pulse generator at 3 K".Abstract: Scaling... -
Federal
AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718
National Institute of Standards and Technology —
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
AM Bench 2022 Measurement Results Data: Optical Microscopy of Laser-scanned Single Tracks and Pads (AMB2022-03)
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with bare plate single track and pad laser scans performed on the... -
Federal
Dataset of channels and received IEEE 802.11ay signals for sensing applications in the 60GHz band
National Institute of Standards and Technology —
The dataset can be used to develop and test algorithms for communication and sensing in the 60GHz band. The dataset consists of synthetically generated indoor mm-wave... -
Federal
Dataset for Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment
National Institute of Standards and Technology —
This data is associated with the manuscript titled Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment. The abstract of... -
Federal
Advanced Characterization of the Cure Kinetics of a Liquid Encapsulant
National Institute of Standards and Technology —
The data are associated with figures in A. P. Kotula, R. Tao, J. Tu, Y. Lee, G. A. Holmes, Advanced Characterization of the Cure Kinetics of a Liquid Encapsulant,... -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #2)
National Institute of Standards and Technology —
The National Institute of Standards and Technology conducted a series of large compartment fire tests to investigate the behavior and fire-induced failure mechanisms... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Data set for Amontons-Coulomb-like slip dynamics in acousto-microfluidics
National Institute of Standards and Technology —
This data set contains the data/information used to plot the graphs published in the 2022 Nat. Comm. article (titled "Amontons-Coulomb-like slip dynamics in acousto-... -
Federal
Independent Calculation of Move Lists for Incumbent Protection in a Multi-SAS Shared Spectrum Environment
National Institute of Standards and Technology —
In a shared spectrum environment, as is the case in the 3.5 GHz Citizens Broadband Radio Service (CBRS), the secondary users with lower priority are managed by... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Electromagnetic Interference Measurements from Tungsten Inert Gas (TIG) Arc Welding
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. Our dataset contains comprehensive... -
Federal
Dataset: An Open Combinatorial Diffraction Dataset Including Consensus Human and Machine Learning Labels with Quantified Uncertainty for Training New Machine Learning Models
Department of Commerce —
The open dataset, software, and other files accompanying the manuscript "An Open Combinatorial Diffraction Dataset Including Consensus Human and Machine Learning... -
Federal
Reference Measurements of Error Vector Magnitude
National Institute of Standards and Technology —
The experiment here was to demonstrate that we can reliably measure the Reference Waveforms designed in the IEEE P1765 proposed standard and calculate EVM along with... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-...
80 datasets found for "博彩导航✅澳门葡京赌场官方网站-网址【079.one】㊙️最火爆PG电子超高爆奖率，注册即送38元.pJjQWbrLMxRC"