-
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
Department of Commerce —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Dataset presenting improved bandwidth in Rydberg atom electrometry with an optical frequency comb probe
National Institute of Standards and Technology —
Rydberg atom-based receivers of modulated radio frequency (RF) fields are promising systems for measurements. These systems are self-calibrating, widely tunable,...- Three column data: Detuning (MHz), Within EIT Power Spectrum (V/rt(Hz)), Outside EIT Power Spectrum (V/rt(Hz))
- Two column data: Detuning (i.e. relative comb tooth frequency) in MHz, Probe comb tooth transmission in arbitrary units
- TEXT
- 21 column data: Measured data with 95 % error bars given in first 10 columns (including three measurement types), Exponential Fits with 95% confidence bounds given in next 10 columns, and 3 dB point used to define bandwidth of each measurement given in the last column
-
Federal
Microstrip and Grounded CPW Calibration Kit Comparison for On-Wafer Transistor Characterization from 220 GHz to 325 GHz
National Institute of Standards and Technology —
Data published in paper "Microstrip and Grounded CPW Calibration Kit Comparison for On-Wafer Transistor Characterization from 220 GHz to 325 GHz"We investigated the...- Comments lines have a % in front of them, data is space delimited.
- Comment lines start with a % sign. Data lines are space delimited
- Comment lines start with a % symbol. Data lines are space delimited
- Commented lines start with a % sign. Data lines are space delimited. Text broken up into three sections. One for the histogram, one for the Gaussian curve, and one for the measured data
- Plain text descriptions of the data files. No specific formatting.
-
Federal
Data associated with the manuscript "Glass microwave microfluidic devices for broadband characterization of diverse fluids" submitted to the Special Issue of the International Microwave Symposium (IMS) 2024 of IEEE Transactions of Microwave Theory and Techniques.
National Institute of Standards and Technology —
Abstract from manuscript:We demonstrate a glass microwave microfluidic device for determining the permittivity of a wide range of liquid chemicals from 100 MHz to 10... -
Federal
Data for "A distributed theory for contactless interconnects at terahertz frequencies"
National Institute of Standards and Technology —
Included here are figures and other relevant data from the paper "A distributed theory for contactless interconnects at terahertz frequencies". Abstract: Here we test... -
Federal
Measuring the permittivity of Fused Silica with planar on-wafer structures up to 325 GHz
National Institute of Standards and Technology —
Fused silica has become an interesting alternative to silicon for millimeter-wave (mmWave) applications. Unfortunately, there are few reports on the measurement of... -
Federal
Broadband Electromagnetic Properties of Engineered Flexible Absorber Materials
Department of Commerce —
Figures and relevant data from the paper "Broadband Electromagnetic Properties of Engineered Flexible Absorber Materials" are found here . The paper was published on... -
Federal
Cryogenic On-chip In Situ S-parameter Calibration Using Superconducting Coplanar Waveguides
Department of Commerce —
These data will appear in [1]. The abstract for that paper is given below:This paper presents a new multi-impedance-state line (MISL) in situ scattering parameter... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Broadband Electromagnetic Properties of Engineered Flexible Absorber Materials
National Institute of Standards and Technology —
Figures and relevant data from the paper "Broadband Electromagnetic Properties of Engineered Flexible Absorber Materials" are found here . The paper was published on... -
Federal
Cryogenic On-chip In Situ S-parameter Calibration Using Superconducting Coplanar Waveguides
National Institute of Standards and Technology —
These data will appear in [1]. The abstract for that paper is given below:This paper presents a new multi-impedance-state line (MISL) in situ scattering parameter... -
Federal
Data associated with the manuscript "Glass microwave microfluidic devices for broadband characterization of diverse fluids" submitted to the Special Issue of the International Microwave Symposium (IMS) 2024 of IEEE Transactions of Microwave Theory and Techniques.
Department of Commerce —
Abstract from manuscript:We demonstrate a glass microwave microfluidic device for determining the permittivity of a wide range of liquid chemicals from 100 MHz to 10... -
Federal
Measuring the permittivity of Fused Silica with planar on-wafer structures up to 325 GHz
Department of Commerce —
Fused silica has become an interesting alternative to silicon for millimeter-wave (mmWave) applications. Unfortunately, there are few reports on the measurement of... -
Federal
Dataset presenting improved bandwidth in Rydberg atom electrometry with an optical frequency comb probe
Department of Commerce —
Rydberg atom-based receivers of modulated radio frequency (RF) fields are promising systems for measurements. These systems are self-calibrating, widely tunable,...- Three column data: Detuning (MHz), Within EIT Power Spectrum (V/rt(Hz)), Outside EIT Power Spectrum (V/rt(Hz))
- Two column data: Detuning (i.e. relative comb tooth frequency) in MHz, Probe comb tooth transmission in arbitrary units
- TEXT
- 21 column data: Measured data with 95 % error bars given in first 10 columns (including three measurement types), Exponential Fits with 95% confidence bounds given in next 10 columns, and 3 dB point used to define bandwidth of each measurement given in the last column
-
Federal
Modeling Line Broadening and Distortion Due to Inhomogeneous Fields for Rydberg Electrometry
National Institute of Standards and Technology —
This set corresponds to a (pending) publication, where we attempt to model spectral features appearing in the lab by calculating many segments of an inhomogeneous... -
Federal
Microstrip and Grounded CPW Calibration Kit Comparison for On-Wafer Transistor Characterization from 220 GHz to 325 GHz
Department of Commerce —
Data published in paper "Microstrip and Grounded CPW Calibration Kit Comparison for On-Wafer Transistor Characterization from 220 GHz to 325 GHz"We investigated the...- Comments lines have a % in front of them, data is space delimited.
- Comment lines start with a % sign. Data lines are space delimited
- Comment lines start with a % symbol. Data lines are space delimited
- Commented lines start with a % sign. Data lines are space delimited. Text broken up into three sections. One for the histogram, one for the Gaussian curve, and one for the measured data
- Plain text descriptions of the data files. No specific formatting.
-
Federal
Data for "Distributed contactless interconnects for millimeter-wave heterogeneous integration"
National Institute of Standards and Technology —
Included here are figures and other relevant data from the paper "Distributed contactless interconnects for millimeter-wave heterogeneous integration", submitted to... -
Federal
Data for "Distributed contactless interconnects for millimeter-wave heterogeneous integration"
Department of Commerce —
Included here are figures and other relevant data from the paper "Distributed contactless interconnects for millimeter-wave heterogeneous integration", submitted to... -
Federal
Modeling Line Broadening and Distortion Due to Inhomogeneous Fields for Rydberg Electrometry
Department of Commerce —
This set corresponds to a (pending) publication, where we attempt to model spectral features appearing in the lab by calculating many segments of an inhomogeneous... -
Federal
Data for "A distributed theory for contactless interconnects at terahertz frequencies"
Department of Commerce —
Included here are figures and other relevant data from the paper "A distributed theory for contactless interconnects at terahertz frequencies". Abstract: Here we test...