-
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
Data Supporting the Development of Targeted GC-MS Methods for Seized Drug Analysis
National Institute of Standards and Technology —
This dataset contains information regarding the development of targeted GC-MS methods for forensic seized drug analysis. Included in this dataset are method parameter... -
Federal
Data set of Flow Resistance Measurements of Vegetation
National Institute of Standards and Technology —
This data set reports measurements of the drag coefficient and geometric parameters of different types of vegetation. The vegetation chosen for this work was a Bakers... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
High-volume, label-free imaging for quantifying single-cell dynamics in iPSC colonies
National Institute of Standards and Technology —
This collection is comprised of multiple sets of experiments involving iPSCs with varying dosages of fluorescent light excitation. Samples were imaged every 2 minutes... -
Federal
Mapping of NIST Cybersecurity Framework v1.1 to NERC CIP Reliability Standards
National Institute of Standards and Technology —
THIS DATASET IS OBSOLETE. PLEASE REFERENCE THE NEWER MAPPING IN OLIR (https://doi.org/10.18434/mds2-3215).The spreadsheets in this data set map National Institute of... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Access Time Analysis of MCPTT Off-Network Mode over LTE
National Institute of Standards and Technology —
Summary of analytical estimates and simulation results that are used to generate figures in a paper titled "Access Time Analysis of MCPTT Off-Network Mode over LTE".... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Generator Fleet Characteristics Model
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Synthetic Temperature Data for Predicting Flashover Occurrence Using Surrogate Temperature Data
National Institute of Standards and Technology —
This data set provides heat detector temperatures in a single-story ranch structure with a living room, kitchen, dining room, and three bedrooms. 20000 sets of... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
Department of Commerce —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Recommended Practices for Calibrated Millimeter-Wave Modulated-Signal Measurements
National Institute of Standards and Technology —
In this paper, we have demonstrated the importance of choosing the correct reference plane for applications such as over-the-air (OTA) modulated-signal measurements... -
Federal
Advanced Characterization of the Cure Kinetics of a Liquid Encapsulant
National Institute of Standards and Technology —
The data are associated with figures in A. P. Kotula, R. Tao, J. Tu, Y. Lee, G. A. Holmes, Advanced Characterization of the Cure Kinetics of a Liquid Encapsulant,... -
Federal
Enhanced durability of CNT based hierarchical composites subjected to accelerated aging environments.
National Institute of Standards and Technology —
Flexure testing, SEM, FTIR_ATR, Acoustic testing, Electrical testing, XRD, DSC, TGA -
Federal
High accuracy spectroscopic parameters of the 1.27 um band of O2 measured with comb-referenced, cavity ring-down spectroscopy
National Institute of Standards and Technology —
Data corresponding to Figs. 2,3,5,6,11,12,13,14 for Fleurbaey et al J. Quant Spectrosc. Radiat. Transf. vol 270, 107684 (2021). doi.org.10.1016/j.jqsrt.2021.107684 -
Federal
Synthetic Temperature Data for Predicting Flashover Occurrence Using Surrogate Temperature Data
Department of Commerce —
This data set provides heat detector temperatures in a single-story ranch structure with a living room, kitchen, dining room, and three bedrooms. 20000 sets of... -
Federal
Templates for the Implementation of DART-MS for Seized Drug Analysis
Department of Commerce —
This dataset includes templates to assist with laboratory implementation of direct analysis in real time mass spectrometry (DART-MS) for seized drug analysis. These...