-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI Units
National Institute of Standards and Technology —
Recommended values are provided for chemical thermodynamic properties of inorganic substances and for organic substances usually containing only one or two carbon... -
Federal
Thermal Drift Monitoring Experiment 01
National Institute of Standards and Technology —
An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Linear Axis Testbed at IMS Center - Run-to-Failure Experiment 01
National Institute of Standards and Technology —
A linear axis testbed at the Center for Intelligent Maintenance Systems (IMS Center) at the University of Cincinnati was run to failure (the detection of backlash)... -
Federal
LTE and Wi-Fi coexistence measurement data
National Institute of Standards and Technology —
This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-... -
Federal
Challenging Medically-Relevant Genes Benchmark Set
National Institute of Standards and Technology —
CMRG v1.00 of a small variant benchmark and structural variant benchmark focused on 273 challenging medically relevant genes for the Genome in a Bottle (GIAB) sample... -
Federal
Simulated X-ray computed tomography (XCT) and ground truth images of cylindrical sample with randomly distributed spherical pores
National Institute of Standards and Technology —
X-ray computed tomography (XCT) datasets with known ground truth pores were developed using realistic XCT simulation. Non-overlapping spherical pores of varying sizes... -
Federal
Complex Document Information Processing (CDIP) dataset
National Institute of Standards and Technology —
This dataset is called the "IIT CDIP collection". "CDIP" stands for "Complex Document Information Processing" and "IIT" stands for "Illinois Institute of Technology"... -
Federal
SHREC'11 Track: Shape Retrieval on Non-rigid 3D Watertight Meshes
National Institute of Standards and Technology —
Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing... -
Federal
In-situ Raman spectra of indented fused silica
National Institute of Standards and Technology —
In-situ Raman spectroscopic measurements were conducted during indentation of fused silica (FS) samples. The experiments were conducted using Raman spectroscopy-... -
Federal
Dataset of channels and received IEEE 802.11ay signals for sensing applications in the 60GHz band
National Institute of Standards and Technology —
The dataset can be used to develop and test algorithms for communication and sensing in the 60GHz band. The dataset consists of synthetically generated indoor mm-wave... -
Federal
High-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parameters
National Institute of Standards and Technology —
This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion... -
Federal
Process and robot data from a two robot workcell representative performing representative manufacturing operations.
National Institute of Standards and Technology —
This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-... -
Federal
Dynamic Polymer Annotated Library
National Institute of Standards and Technology —
Dynamic Polymer Annotated Library (DPAL)DPAL is an annotated library of peer-reviewed research that aims to: (1) Fill a knowledge gap in the materials science field... -
Federal
Dataset for Establishing a Reference Focal Plane Using Machine Learning and Beads for Brightfield Imaging
National Institute of Standards and Technology —
This dataset consists of sets of images corresponding to the data sets 1-8 described in Table 1 in the manuscript "Establishing a Reference Focal Plane Using Machine... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Experimental test of the intrinsic dimensionality of Hounsfield unit measurements: the CT data
National Institute of Standards and Technology —
We present the data supporting "Experimental test of the intrinsic dimensionality of Hounsfield unit measurements" (In preparation). In this study, we passed 34...