-
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Hurricane Maria Wind-Field Model for Puerto Rico
National Institute of Standards and Technology —
This data comprises the wind-field model for Hurricane Maria in Puerto Rico, which occurred in 2017. Wind speeds are reported as equivalent three-second peak gust... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Data for A Dual Mode Brillouin/Low-Frequency Raman Spectroscopy Microscope for Local Mechanical Property Imaging for Semiconductor Packaging Materials
National Institute of Standards and Technology —
The processed spectroscopic and experimental conditions (as applicable) data which are used to construct each figure is provided. -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files from the experiment titled OverhangPartX16 pertaining to a three-dimensional (3D) additive manufacturing (AM) build performed on the... -
Federal
AM Bench 2022 Measurement Results Data: Optical Microscopy of Laser-scanned Single Tracks and Pads (AMB2022-03)
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with bare plate single track and pad laser scans performed on the... -
Federal
Data for manuscript: Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers
National Institute of Standards and Technology —
Experimental and modeling data for manuscript "Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers" by Chad Ropp, Dhriti Maurya, Alexander... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
National Institute of Standards and Technology —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Data for "A distributed theory for contactless interconnects at terahertz frequencies"
National Institute of Standards and Technology —
Included here are figures and other relevant data from the paper "A distributed theory for contactless interconnects at terahertz frequencies". Abstract: Here we test... -
Federal
Single-track laser scan cross-sectional micrographs on IN625 and IN718 bare plates with melt pool depth and width measurements
National Institute of Standards and Technology —
Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power,... -
Federal
Enhanced durability of CNT based hierarchical composites subjected to accelerated aging environments.
National Institute of Standards and Technology —
Flexure testing, SEM, FTIR_ATR, Acoustic testing, Electrical testing, XRD, DSC, TGA -
Federal
Data for "Distributed contactless interconnects for millimeter-wave heterogeneous integration"
National Institute of Standards and Technology —
Included here are figures and other relevant data from the paper "Distributed contactless interconnects for millimeter-wave heterogeneous integration", submitted to... -
Federal
Code for SerialTrack-XR particle tracking
National Institute of Standards and Technology —
This repository contains scripts for running a custom implementation of "SerialTrack" designed for 2D X-ray projection images taken during in situ micro-X-ray...