-
Federal
Experimental data sets for viscosity and surface tension of binary mixtures at the temperatures (293.15 to 323.15) K and the pressures (99.325 to 103.325) kPa recent views
National Institute of Standards and Technology —
This is a research data set extracted from NIST Standard Reference Database 103b and contains raw experimental data for viscosity and surface tension of binary mixtures. -
Federal
On-Wafer Device Characterization Including Uncertainty Estimates to 1.0 THz recent views
National Institute of Standards and Technology —
data published in paper "On-Wafer Device Characterization Including Uncertainty Estimates to 1.0 THz"This dataset contains the calibrated scattering parameters...- There are two sections. 1st section is the measured data and 2nd section is the simulated data. Commented lines start with a % sign. Data lines are space delimited.
- There are two sections. 1st section is the measured data and 2nd section is the simulated data. Commented lines start with a % sign. Data lines are space delimited.
- There are three sections. 1. Measured capacitance of Tech. 1 and Tech. 2 series capacitors. 2. Simulated capacitance of the the Tech 1. series capacitor. 3. Simulated capacitance of the Tech 2. series capacitor. Commented lines start with a % sign. Data lines are space delimited.
- There are two sections. 1st section is the measured data and 2nd section is the simulated data. Commented lines start with a % sign. Data lines are space delimited.
- There are two sections. 1st section is the measured data and 2nd section is the simulated data. Commented lines start with a % sign. Data lines are space delimited.
- There are three sections. 1. Measured capacitance of Tech. 1 and Tech. 2 shunt capacitors. 2. Simulated capacitance of the the Tech 1. shunt capacitor. 3. Simulated capacitance of the Tech 2. shunt capacitor. Commented lines start with a % sign. Data lines are space delimited.
- 4 more in dataset
-
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition recent views
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Generator Fleet Characteristics Model recent views
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Data Publication: Metallurgical Analysis and Conservation of Turbine Blades from Recovered Apollo F-1 Engines recent views
National Institute of Standards and Technology —
This data set includes data and metadata about a metallurgical analysis and conservation of turbine blades from a recovered F-1 engine from the Apollo 16 Saturn V... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO) recent views
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
AM Bench 2022 ASTM E8 Macroscale Tension at Different Strain Rates on As-built IN625 recent views
National Institute of Standards and Technology —
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are... -
Federal
NIST DART-MS Forensics Database (is-CID) recent views
National Institute of Standards and Technology —
The NIST DART-MS Forensics Database is an evaluated collection of in-source collisionally-induced dissociation (is-CID) mass spectra of compounds of interest to the... -
Federal
AM Bench 2022 IN625 3D Build Microstructure Modeling Challenge Description Data (AMB2022-05) recent views
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser... -
Federal
CMOS Sky130 Primitives measured at cryogenic temperatures recent views
National Institute of Standards and Technology —
Sky130 is an open source complimentary metal oxide semiconductor (CMOS) technology manufactured by Skywater Technology in its facility in Bloomington, Minnesota.... -
Federal
Selfish Mining Simulator for Cryptocurrencies recent views
National Institute of Standards and Technology —
Software to simulate performing a selfish mining attack against certain cryptocurrencies' difficulty algorithms. Allows tweaking parameters of the attack and the... -
Federal
High-SNR I/Q Recordings of FDD LTE User Equipment Emissions recent views
National Institute of Standards and Technology —
This dataset consists of high signal-to-noise ratio (SNR) in-phase and quadrature (I/Q) radio frequency (RF) recordings of long-term evolution (LTE) uplink emissions... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16 recent views
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
GIAB Benchmarking of HG002 Assemblies from HPRC Year 1 Bakeoff recent views
National Institute of Standards and Technology —
The Human Pangenome Reference Consortium (HPRC) tested which combination of current genome sequencing and automated assembly approaches yields the most complete,... -
Federal
KLA stylus profilometry of Parylene C devices recent views
National Institute of Standards and Technology —
We obtained stylus profilometry measurements of Parylene C devices after soaking in different fluid conditions in a microfluidic environment. The Parylene C devices... -
Federal
SHREC'09 Track: Generic Shape Retrieval recent views
National Institute of Standards and Technology —
The objectives of this shape retrieval contest are to evaluate the performance of 3D shape retrieval approaches on a new generic 3D shape benchmark. Task description:... -
Federal
Effects of Non-Sinusoidal Current Phase Relationships on Single Flux Quantum Circuits recent views
National Institute of Standards and Technology —
Data is for "Effects of Non-Sinusoidal Current Phase Relationships on Single Flux Quantum Circuits" and publication in IEEE Transactions on Applied Superconductivity.... -
Federal
Dataset for: A technique for in-situ displacement and strain measurement with laboratory-scale X-ray Computed Tomography recent views
National Institute of Standards and Technology —
This record provides raw and post-processed data used in the associated paper "A technique for in-situ displacement and strain measurement with laboratory-scale X-ray... -
Federal
Sequence-based allelic variations and frequencies for 22 autosomal STR loci in the Lebanese population - Supplementary material recent views
National Institute of Standards and Technology —
This data repository is meant to provide the supplementary files, tables, and figures included in the peer-reviewed research article entitled: "Sequence-based allelic... -
Federal
SHREC'14 Track: Large Scale Comprehensive 3D Shape Retrieval recent views
National Institute of Standards and Technology —
Objective: The objective of this track is to evaluate the performance of 3D shape retrieval approaches on a large-sale comprehensive 3D shape database which contains...