57 datasets found for "苹果cmsV10清新简约短视频卡片风格蓝紫渐变色短视频网页模板源码✅项目合作 二开均可 TG：saolei44✅.ErgJuTySbElK"
-
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
Tables from "Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922-1940 and Relevance to Pipeline Management" (NISTIR 7415)
National Institute of Standards and Technology —
Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Digital control of a superconducting qubit using a Josephson pulse generator at 3 K
National Institute of Standards and Technology —
Included here are data used to generate figures from the paper "Digital control of a superconducting qubit using a Josephson pulse generator at 3 K".Abstract: Scaling... -
Federal
High-volume, label-free imaging for quantifying single-cell dynamics in iPSC colonies
National Institute of Standards and Technology —
This collection is comprised of multiple sets of experiments involving iPSCs with varying dosages of fluorescent light excitation. Samples were imaged every 2 minutes... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Data Supporting the Development of Targeted GC-MS Methods for Seized Drug Analysis
National Institute of Standards and Technology —
This dataset contains information regarding the development of targeted GC-MS methods for forensic seized drug analysis. Included in this dataset are method parameter... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
Data tables for Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2022: Annual Supplement to NIST Handbook 135
National Institute of Standards and Technology —
Data tables for Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - 2022: Annual Supplement to NIST Handbook 13Starting in the 2022 Annual... -
Federal
Advanced Characterization of the Cure Kinetics of a Liquid Encapsulant
National Institute of Standards and Technology —
The data are associated with figures in A. P. Kotula, R. Tao, J. Tu, Y. Lee, G. A. Holmes, Advanced Characterization of the Cure Kinetics of a Liquid Encapsulant,... -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #2)
National Institute of Standards and Technology —
The National Institute of Standards and Technology conducted a series of large compartment fire tests to investigate the behavior and fire-induced failure mechanisms... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Access Time Analysis of MCPTT Off-Network Mode over LTE
National Institute of Standards and Technology —
Summary of analytical estimates and simulation results that are used to generate figures in a paper titled "Access Time Analysis of MCPTT Off-Network Mode over LTE".... -
Federal
AM Bench 2022 Measurement Results Data: Optical Microscopy of Laser-scanned Single Tracks and Pads (AMB2022-03)
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with bare plate single track and pad laser scans performed on the... -
Federal
Mapping of NIST Cybersecurity Framework v1.1 to NERC CIP Reliability Standards
National Institute of Standards and Technology —
THIS DATASET IS OBSOLETE. PLEASE REFERENCE THE NEWER MAPPING IN OLIR (https://doi.org/10.18434/mds2-3215).The spreadsheets in this data set map National Institute of... -
Federal
Data set of Flow Resistance Measurements of Vegetation
National Institute of Standards and Technology —
This data set reports measurements of the drag coefficient and geometric parameters of different types of vegetation. The vegetation chosen for this work was a Bakers... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Generator Fleet Characteristics Model
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet.
57 datasets found for "苹果cmsV10清新简约短视频卡片风格蓝紫渐变色短视频网页模板源码✅项目合作 二开均可 TG：saolei44✅.ErgJuTySbElK"