-
Federal
Tables from "Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922-1940 and Relevance to Pipeline Management" (NISTIR 7415)
National Institute of Standards and Technology —
Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Digital control of a superconducting qubit using a Josephson pulse generator at 3 K
National Institute of Standards and Technology —
Included here are data used to generate figures from the paper "Digital control of a superconducting qubit using a Josephson pulse generator at 3 K".Abstract: Scaling... -
Federal
AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718
National Institute of Standards and Technology —
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #2)
National Institute of Standards and Technology —
The National Institute of Standards and Technology conducted a series of large compartment fire tests to investigate the behavior and fire-induced failure mechanisms... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Dataset of channels and received IEEE 802.11ay signals for sensing applications in the 60GHz band
National Institute of Standards and Technology —
The dataset can be used to develop and test algorithms for communication and sensing in the 60GHz band. The dataset consists of synthetically generated indoor mm-wave... -
Federal
Data set of Flow Resistance Measurements of Vegetation
National Institute of Standards and Technology —
This data set reports measurements of the drag coefficient and geometric parameters of different types of vegetation. The vegetation chosen for this work was a Bakers... -
Federal
Reference Measurements of Error Vector Magnitude
National Institute of Standards and Technology —
The experiment here was to demonstrate that we can reliably measure the Reference Waveforms designed in the IEEE P1765 proposed standard and calculate EVM along with... -
Federal
Dataset for Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment
National Institute of Standards and Technology —
This data is associated with the manuscript titled Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment. The abstract of... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Sequence-based allelic variations and frequencies for 22 autosomal STR loci in the Lebanese population - Supplementary material
National Institute of Standards and Technology —
This data repository is meant to provide the supplementary files, tables, and figures included in the peer-reviewed research article entitled: "Sequence-based allelic... -
Federal
SRM 1548b Typical Diet
National Institute of Standards and Technology —
SRM 1548b electronic files containing the non-certified value and uncertainty, and the data used to assign that value. Certificate date 24 June 2024: Non-certified... -
Federal
Generator Fleet Characteristics Model
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
National Institute of Standards and Technology —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Macroscale Compression at Different Temperatures and Orientations (CHAL-AMB2022-04-MaCTO)
National Institute of Standards and Technology —
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625... -
Federal
Synthetic Temperature Data for Predicting Flashover Occurrence Using Surrogate Temperature Data
National Institute of Standards and Technology —
This data set provides heat detector temperatures in a single-story ranch structure with a living room, kitchen, dining room, and three bedrooms. 20000 sets of... -
Federal
Tables from "Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922-1940 and Relevance to Pipeline Management" (NISTIR 7415)
Department of Commerce —
Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
Department of Commerce —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM...