-
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
NIST SAMATE Software Assurance Reference Dataset
National Institute of Standards and Technology —
This dataset provides the NIST Software Assurance Metrics And Tool Evaluation (SAMATE) Software Assurance Reference Dataset (SARD) - a set of programs with known... -
Federal
LTE and Wi-Fi coexistence measurement data
National Institute of Standards and Technology —
This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-... -
Federal
Thermal Drift Monitoring Experiment 01
National Institute of Standards and Technology —
An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A... -
Federal
High-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parameters
National Institute of Standards and Technology —
This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion... -
Federal
Three dimensional shape and size X-ray CT database for 1.1 million particles from 17 different lunar regolith simulants
Department of Commerce —
Lunar regolith simulants are manufactured in order to provide a higher volume, much less expensive and more available source of material, compared to real lunar... -
Federal
Dataset for Establishing a Reference Focal Plane Using Machine Learning and Beads for Brightfield Imaging
National Institute of Standards and Technology —
This dataset consists of sets of images corresponding to the data sets 1-8 described in Table 1 in the manuscript "Establishing a Reference Focal Plane Using Machine... -
Federal
High-volume, label-free imaging for quantifying single-cell dynamics in iPSC colonies
National Institute of Standards and Technology —
This collection is comprised of multiple sets of experiments involving iPSCs with varying dosages of fluorescent light excitation. Samples were imaged every 2 minutes... -
Federal
Data Supporting the Development of Targeted GC-MS Methods for Seized Drug Analysis
National Institute of Standards and Technology —
This dataset contains information regarding the development of targeted GC-MS methods for forensic seized drug analysis. Included in this dataset are method parameter... -
Federal
NIST DART-MS Forensics Database (is-CID)
National Institute of Standards and Technology —
The NIST DART-MS Forensics Database is an evaluated collection of in-source collisionally-induced dissociation (is-CID) mass spectra of compounds of interest to the... -
Federal
Dataset: An Inter-Laboratory Study of Zn-Sn-Ti-O Thin Films using High-throughput Experimental Methods
National Institute of Standards and Technology —
The open dataset accompanying An Inter-Laboratory Study of Zn-Sn-Ti-O Thin Films using High-throughput Experimental Methods... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Three dimensional shape and size X-ray CT database for 1.1 million particles from 17 different lunar regolith simulants
National Institute of Standards and Technology —
Lunar regolith simulants are manufactured in order to provide a higher volume, much less expensive and more available source of material, compared to real lunar... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): 3D Scan Strategies
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing build performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on July... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
Process and robot data from a two robot workcell representative performing representative manufacturing operations.
National Institute of Standards and Technology —
This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-... -
Federal
X-ray computed tomography data of Additive Manufacturing Metrology Testbed (AMMT) parts: Overhang Part X4
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the four parts built as part of the "Overhang Part X4" in-situ... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was...