12 datasets found
-
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
NIST Fracture Toughness / Fracture Energy Data for Oxide Glass - SRD 137
National Institute of Standards and Technology —
The NIST Oxide Glasses Collection has property data on borate base glasses, germanate base glasses, phosphate base glasses and silicate base glasses. -
Federal
NIST Property Data Summaries for Advanced Materials - SRD 150
National Institute of Standards and Technology —
Property Data Summaries are collections of property values derived from surveys of published data. These collections typically focus on either one material or one... -
Federal
Advanced TidGen Power System - Composites Structural Testing
Department of Energy —
Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake,... -
Federal
Project Red: Monitoring Well 73-22 Geophysical and Mud Logging Data - 2022
Department of Energy —
This dataset contains open-hole geophysical and mud logging measurements acquired in 2022 from Monitoring Well 73-22 in the Blue Mountain Geothermal Field, Humboldt... -
Federal
Compressive Stress-Strain Curves for Wrought and AM Precipitation-Hardenable Stainless Steel at Dynamic Strain Rates at Room Temperature and with Rapid Heating and at Low Strain Rates at Room Temperature
National Institute of Standards and Technology —
This dataset contains compressive stress-strain data (strain, stress and strain rate curves and initial temperatures) for compression experiments performed on wrought... -
Federal
Data for A Dual Mode Brillouin/Low-Frequency Raman Spectroscopy Microscope for Local Mechanical Property Imaging for Semiconductor Packaging Materials
National Institute of Standards and Technology —
The processed spectroscopic and experimental conditions (as applicable) data which are used to construct each figure is provided. -
Federal
Numerical Modeling for Hydraulic Fracture Prediction
Department of Energy —
Numerical modeling on fused silica cylindrical materials for predicting overpressures required to fracture an homogeneous pure (surrogate) material with known... -
Federal
Utah FORGE: Well 58-32 Core Analyses
Department of Energy —
This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF... -
Federal
Ageing of High Strength p-Aramid Fibers Used in Body Armor
National Institute of Standards and Technology —
To improve the reliability and design of armor, it is imperative to understand the failure modes and the degradation rates of the materials used in armor. Despite the... -
Federal
NIST Ceramics WebBook
National Institute of Standards and Technology —
The Ceramics WebBook is a gateway to evaluated data, a guide to data centers and sources and a repository for tools and resources for ceramics.
12 datasets found