-
Federal
MODFLOW-USG model used to evaluate water management issues in the Los Angeles Coastal Plain, California
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Water Replenishment District of Southern California, developed a regional groundwater model of the Los... -
Federal
MODFLOW-2005 with SWI2 used to evaluate the water-table response to sea-level rise and change in recharge, Sandy Hook Unit, Gateway National Recreation Area, New Jersey
Department of the Interior —
A MODFLOW-2005 model, using the SWI2 package, was developed for the Sandy Hook Unit, Gateway National Recreation Area (hereafter Sandy Hook) in New Jersey to evaluate... -
Federal
MODFLOW-2005, MODFLOW-NWT, and SEAWAT models used to simulate variable-density groundwater flow and contaminant transport at Naval Base Kitsap, Keyport, Washington
Department of the Interior —
The U.S. Geological Survey, in cooperation with the U.S. Department of the Navy, developed several 3-D groundwater flow models for used with MODFLOW-2005, MODFLOW-... -
Federal
MODFLOW-NWT model used for the simulation of the Cimarron River Alluvial Aquifer in the Pawnee Nation jurisdictional area in Payne County, OK, 2016-17
Department of the Interior —
A three-dimensional, finite-difference MODFLOW 2005 groundwater model using the Newton formulation solver (MODFLOW-NWT) was created for the Cimarron River alluvial... -
Federal
MODFLOW 2005 and MODPATH 5 model data sets used to evaluate seepage-meter efficiency in high-permeability settings
Department of the Interior —
A three-dimensional finite-difference model, MODFLOW-2005 (version 1.12.00), was developed to better understand how Seepage Meter efficiency changes when installed in... -
Federal
MODFLOW-2005 files for numerical model simulations of potential changes in water levels and capture of natural discharge from groundwater withdrawals in Snake Valley and adjacent areas, Utah and Nevada
Department of the Interior —
A previously developed numerical groundwater flow model of the eastern Great Basin was used to investigate where potential drawdown and capture of natural discharge... -
Federal
MODFLOW 6 and MODPATH 7 model data sets used for the update of the groundwater-flow model for the Great Miami Buried Valley Aquifer in the vicinity of Wright-Patterson Air Force Base near Dayton, Ohio
Department of the Interior —
A previously constructed numerical model (https://pubs.usgs.gov/pp/2007/1737a/) simulating the regional groundwater-flow system in the vicinity of the Wright-... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington
Department of the Interior —
A three-dimensional groundwater flow model was developed in 1997 to evaluate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton,... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system of the Kitsap Peninsula, West-Central Washington
Department of the Interior —
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system of the Kitsap Peninsula, west-central... -
Federal
Cache Historical Calibration Period Groundwater-Flow Model
Department of the Interior —
The Mississippi Alluvial Plain (MAP) is one of the most important agricultural regions in the United States and underlies about 32,000 square miles of Missouri,... -
Federal
Algorithms for model parameter estimation and state estimation using the Kalman Filter for forecasting, filtering, and fixed-lag smoothing applied to a state-space model for one-dimensional vertical infiltration
Department of the Interior —
The algorithms in this data release implement a State-Space Model (SSM) of vertical infiltration through the unsaturated zone and recharge to the water table. These... -
Federal
MODFLOW-2005 model used to Simulate the Evolution of Fluid Underpressures in the Great Plains, by Incorporation of Tectonic Uplift and Tilting
Department of the Interior —
A sequence of nine two-dimensional cross-sectional groundwater models using MODFLOW-2005 was created to study whether underpressures (subhydrostatic heads) in the... -
Federal
SEAWAT code used to couple MODFLOW and MT3DMS models, and supplemental data used to simulate groundwater flow and tritium transport from the HANDLEY underground nuclear test, Pahute Mesa, southern Nevada
Department of the Interior —
Three-dimensional numerical models were used to determine the permeable pathways between the HANDLEY underground nuclear test and downgradient boreholes ER-20-12 and... -
Federal
MODFLOW-2005, MODPATH, and MOC3D used for groundwater flow simulation, pathlines analysis, and solute transport in the crystalline-rock aquifer in the vicinity of the Savage Municipal Water-Supply Well Superfund Site, Milford, New Hampshire
Department of the Interior —
The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the New Hampshire Department of Environmental Services, developed a model... -
Federal
MODFLOW-2005 and MODPATH models in support of groundwater flow model investigation of water resources at Chaco Culture National Historical Park
Department of the Interior —
Situated in a remote corner of northwestern New Mexico, Chaco Culture National Historical Park (CCNHP) was once the center of a sophisticated social, political and... -
Federal
MODFLOW 6 Groundwater Flow Model for the Des Moines River Alluvial Aquifer near Des Moines, Iowa
Department of the Interior —
Des Moines Water Works (DMWW) is a regional municipal water utility that supplies residential and commercial water resources to about 600,000 customers in Des Moines,... -
Federal
MODFLOW 2005 data sets for the simulation of potential increased inundation in flood-prone regions of Southeast Florida in response to climate and sea-level changes in Broward County, Florida, 2060-69
Department of the Interior —
Two transient surface-water/groundwater models were developed to study the potential for increased inundation and flooding in eastern Broward County due to changes in... -
Federal
MODFLOW model used in simulation of groundwater flow and analysis of projected water use for the Rush Springs aquifer, western Oklahoma
Department of the Interior —
In 2018 The U.S. Geological Survey, in cooperation with the U.S. Bureau of Reclamation and the Oklahoma Water Resources Board, published a calibrated numerical... -
Federal
GFLOW model files used to generate probabilistic waste-water plume extents and contributing areas to supply wells for a proposed waste-water infiltration lagoon scenario, Lac du Flambeau, Wisconsin.
Department of the Interior —
This data release contains files for three scenarios of an analytic element (GFLOW) groundwater flow model with particle-tracking that were developed in cooperation... -
Federal
MODFLOW simulator used to assess groundwater flow for the Whiting Field Naval Air Station, Milton, FL
Department of the Interior —
The study of Whiting Field Naval Air Station, Milton Florida requires numerical modeling of the groundwater system to determine the fate of contaminants released at...