-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Data for Numisheet 2020 uniaxial tensile and tension/compression tests
National Institute of Standards and Technology —
This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Smartphone Data for Development of Indoor Localization Apps
National Institute of Standards and Technology —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
Department of Commerce —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Dynamic Polymer Annotated Library
National Institute of Standards and Technology —
Dynamic Polymer Annotated Library (DPAL)DPAL is an annotated library of peer-reviewed research that aims to: (1) Fill a knowledge gap in the materials science field... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
National Institute of Standards and Technology —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Phenylcyclohexane: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Data associated with "Characterizing the broadband RF permittivity of 3D-integrated layers in a glass wafer stack from 100 MHz to 30 GHz" for the 2024 International Microwave Symposium (IMS) in Washington, D.C.
National Institute of Standards and Technology —
We present a method for accurately determining the permittivity of dielectric materials in 3D integrated structures at broadband RF frequencies. With applications of... -
Federal
AM Bench 2022 3D Build Modeling Challenge Description Data (AMB2022-01)
National Institute of Standards and Technology —
The following data files are provided in support of the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) modeling challenges associated with laser... -
Federal
Data associated with "Primary quantum thermometry of mm-wave blackbody radiation via induced state transfer in Rydberg states of cold atoms"
National Institute of Standards and Technology —
Rydberg states of alkali atoms are highly sensitive to electromagnetic radiation in the GHz-to-THz regime because their transitions have large electric dipole... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
Observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions from the Los Angeles Megacity Carbon Project
Department of Commerce —
Updated April 2025. Here we provide hourly observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions in dry air from tower- and... -
Federal
Data for manuscript: Integrated photonic optomechanical atomic force microscopy probes batch fabricated using deep UV photolithography
National Institute of Standards and Technology —
Data from figure 4 "Measuring photonic optomechanical devices" in manuscript "Integrated photonic optomechanical atomic force microscopy probes batch fabricated using... -
Federal
Validation Data and Control Software for ATIC: Automated Testbed for Interference Testing in Communication Systems
National Institute of Standards and Technology —
Validation data and software for the paper, "ATIC: Automated Testbed for Interference Testing in Communication Systems," to appear in Proceedings of 2023 IEEE... -
Federal
Dataset for: A technique for in-situ displacement and strain measurement with laboratory-scale X-ray Computed Tomography
National Institute of Standards and Technology —
This record provides raw and post-processed data used in the associated paper "A technique for in-situ displacement and strain measurement with laboratory-scale X-ray... -
Federal
AM Bench 2022 ASTM E8 Macroscale Tension at Different Strain Rates on As-built IN625
National Institute of Standards and Technology —
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are... -
Federal
Data and code for "Predicting the toughness of compatibilized polymer blends"
National Institute of Standards and Technology —
This code and example files were used to run the self-consistent field theory parameterization in the publication "Predicting the toughness of compatibilized polymer...