-
Federal
Data associated with "Two-dimensional imaging of electromagnetic fields via light sheet fluorescence imaging with Rydberg atoms"
National Institute of Standards and Technology —
Data associated with the publication: "Two-dimensional imaging of electromagnetic fields via light sheet fluorescence imaging with Rydberg atoms"Abstract:The ability... -
Federal
Dataset for Establishing a Reference Focal Plane Using Machine Learning and Beads for Brightfield Imaging
National Institute of Standards and Technology —
This dataset consists of sets of images corresponding to the data sets 1-8 described in Table 1 in the manuscript "Establishing a Reference Focal Plane Using Machine... -
Federal
Uplink IQ Recordings
National Institute of Standards and Technology —
This data is provided as a supplement to NIST Technical Note 2159 Laboratory Method for Recording AWS-3 LTE Waveforms available at... -
Federal
Mosaic Standards Challenge
National Institute of Standards and Technology —
This repository contains all submissions made to the Mosaic Standards challenge from the period of the challenge opening through December 31st, 2019. The Mosaic... -
Federal
Generator Fleet Characteristics Model
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Observations of CO2, CH4, and CO mole fractions from the NIST Northeast Corridor urban testbed
National Institute of Standards and Technology —
NOTE: please see the latest (March 2025) update at https://doi.org/10.18434/mds2-3765. Hourly observations of CO2 and CH4 from tower-based sites in the NIST Northeast... -
Federal
AM Bench 2022 3D Build with Custom Laser Scan Strategies Modeling Challenge (AMB2022-02)
National Institute of Standards and Technology —
The following data files are provided in support of the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) modeling challenges associated with laser... -
Federal
Experimental Measurements for Fire Model Validation - Parallel Panel Tests on PMMA
National Institute of Standards and Technology —
A set of 6 experiments was performed on poly(methyl methacrylate), PMMA. In each test, samples (i.e., 2.44 m tall, 0.61 m wide slabs of PMMA mounted in a parallel... -
Federal
NIST Photoionization of CO2 (ARPES) Database - SRD 119
National Institute of Standards and Technology —
CO2 is studied using dispersed synchrotron radiation in the 650 Å and 840 Å spectral region. The vibrationally resolved photoelectron spectra are analyzed to generate... -
Federal
Synthetic Temperature Data for P-Flash - A Machine Learning-Based Model for Flashover Prediction Using Recovered Temperature Data
Department of Commerce —
This data set provides heat detector temperatures in a single story three-compartment structure. 1000 sets of detector temperatures are generated using CData [1]. The... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Forensic DNA Open Dataset
Department of Commerce —
This dataset consists of single source and mixture samples which were genotyped/sequenced with kits targeting Forensic DNA markers. More information specific to the... -
Federal
Expansivity of fused quartz glass measured within 6 x 10^-10 /K
National Institute of Standards and Technology —
Supplemental material to the article "Expansivity of fused quartz glass measured within 6 x 10^-10 /K" by P F Egan in International Journal of Thermophysics 2024. The... -
Federal
Single-track laser scan cross-sectional micrographs on IN625 and IN718 bare plates with melt pool depth and width measurements
Department of Commerce —
Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power,... -
Federal
Observations of CO2, CH4, and CO mole fractions from the NIST Northeast Corridor urban testbed
Department of Commerce —
NOTE: please see the latest (March 2025) update at https://doi.org/10.18434/mds2-3765 . This archive is from November 2021.We have become aware of errors in the inlet... -
Federal
Observations of CO2, CH4, and CO mole fractions from the NIST Northeast Corridor urban testbed
National Institute of Standards and Technology —
NOTE: please see the latest (March 2025) update at https://doi.org/10.18434/mds2-3765 . This archive is from November 2021.We have become aware of errors in the inlet... -
Federal
Design, Manufacturing, and Inspection Data for a Box Assembly
Department of Commerce —
To better understand and address the challenges faced in linking all stages of a manufacturing and design process, an investigative fabrication process was designed... -
Federal
Single-track laser scan cross-sectional micrographs on IN625 and IN718 bare plates with melt pool depth and width measurements
National Institute of Standards and Technology —
Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power,... -
Federal
Generator Fleet Characteristics Model
Department of Commerce —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Genome In A Bottle - v3.0 Genome Stratifications
Department of Commerce —
These v3.0 stratification BED files from the Global Alliance for Genomic Health (GA4GH) Benchmarking Team, the Genome in a Bottle Consortium and the Telomere-to-...