-
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
NIST SRD 46. Critically Selected Stability Constants of Metal Complexes: Version 8.0 for Windows
National Institute of Standards and Technology —
This version of NIST Standard Reference Database 46 is a major enhancement to this widely used database which provides comprehensive coverage of interactions for... -
Federal
Data for Numisheet 2020 uniaxial tensile and tension/compression tests
National Institute of Standards and Technology —
This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four... -
Federal
ThermoML/Data Archive
National Institute of Standards and Technology —
ThermoML is an XML-based IUPAC standard for the storage and exchange of experimental thermophysical and thermochemical property data. The ThermoML archive is a subset... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions from the Los Angeles Megacity Carbon Project
Department of Commerce —
Updated April 2025. Here we provide hourly observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions in dry air from tower- and... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
NIST/NIJ DART-MS Data Interpretation Tool
National Institute of Standards and Technology —
Direct Analysis in Real Time Mass Spectrometry (DART-MS) is an analytical chemistry technology that is being increasingly employed in forensic applications. This form... -
Federal
NIST's Integrated Colony Enumerator
National Institute of Standards and Technology —
This work involves only data processing software and does not involve data to publish. Data are acquired by the users of this software by the following methods. Two... -
Federal
MAUD-Tutorial Files for "MAUD Rietveld Refinement Software for Neutron Diffraction Texture Studies of Single and Dual-Phase Materials"
National Institute of Standards and Technology —
This data set contains files included in the detailed instructional demonstration paper submitted to Integrating Materials and Manufacturing Innovation. The detailed... -
Federal
Observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions from the Los Angeles Megacity Carbon Project
National Institute of Standards and Technology —
Updated April 2025. Here we provide hourly observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions in dry air from tower- and... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Mapping of NIST Cybersecurity Framework Subcategories to Threat Scenarios from the National Electric Sector Cybersecurity Organization Resource (NESCOR) Electric Sector Failure Scenarios and Impact Analyses - Version 3.0
Department of Commerce —
This document identifies the NIST Cybersecurity Framework Subcategories that map closely to the potential mitigations within Advanced Metering Infrastructure (AMI),... -
Federal
Time Series Data from Sensors in the Duct Above a Kitchen Cooktop During Normal Cooking and Ignition Conditions
National Institute of Standards and Technology —
This data set includes the time series data from 16 electrochemical, optical, temperature and humidity sensors in 60 experiments to characterize the conditions... -
Federal
SHREC'12 Track: Sketch-Based 3D Shape Retrieval
Department of Commerce —
The objective of this SHREC'12 track is to evaluate the performance of different sketch-based 3D model retrieval algorithms using both hand-drawn and standard line... -
Federal
NIST/NIBIB Medical Imaging Phantom Lending Library
National Institute of Standards and Technology —
This database contains imaging and calibration data for phantoms contained in the NIST/NIBIB Phantom Lending Library (PLL). Description and access to the PLL can be... -
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
Department of Commerce —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Segmentation of lipid nanoparticles from cryogenic electron microscopy images
National Institute of Standards and Technology —
Lipid nanoparticles (LNPs) were prepared as described (https://doi.org/10.1038/s42003-021-02441-2) using the lipids DLin-KC2-DMA, DSPC, cholesterol, and PEG-DMG2000... -
Federal
Three dimensional shape and size X-ray CT database for 1.1 million particles from 17 different lunar regolith simulants
Department of Commerce —
Lunar regolith simulants are manufactured in order to provide a higher volume, much less expensive and more available source of material, compared to real lunar...