- 
  
    FederalDynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heatingNational Institute of Standards and Technology — This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy...
- 
  
    FederalNIST SAMATE Software Assurance Reference DatasetNational Institute of Standards and Technology — This dataset provides the NIST Software Assurance Metrics And Tool Evaluation (SAMATE) Software Assurance Reference Dataset (SARD) - a set of programs with known...
- 
  
    FederalThermal Drift Monitoring Experiment 01National Institute of Standards and Technology — An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A...
- 
  
    FederalRadio Access Network Anomalous State Detection DatasetNational Institute of Standards and Technology — This project [1] produced two types of data: Working Data and Derived Data. The Working Data includes raw measurements collected from a Radio Access Network (RAN)...
- 
  
    FederalLTE and Wi-Fi coexistence measurement dataNational Institute of Standards and Technology — This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-...
- 
  
    FederalHigh-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parametersNational Institute of Standards and Technology — This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion...
- 
  
    FederalProcess and robot data from a two robot workcell representative performing representative manufacturing operations.National Institute of Standards and Technology — This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-...
- 
  
    FederalDataset for Establishing a Reference Focal Plane Using Machine Learning and Beads for Brightfield ImagingNational Institute of Standards and Technology — This dataset consists of sets of images corresponding to the data sets 1-8 described in Table 1 in the manuscript "Establishing a Reference Focal Plane Using Machine...
- 
  
    FederalProcess-structure-properties investigations for laser powder bed fused IN718 in the as-built conditionNational Institute of Standards and Technology — This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different...
- 
  
    FederalSHREC'10 Track: Non-rigid 3D Shape RetrievalNational Institute of Standards and Technology — Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing...
- 
  
    FederalDataset for paper Y. Ma, S. Mosleh and J. Coder, "Analyzing 5G NR-U and WiGig Coexistence with Multiple-Beam Directional LBT," 2022 IEEE 19th Annual Consumer Communications & Networking Conference (CCNC), 2022, pp. 272-275, doi: 10.1109/CCNC49033.2022.9700690National Institute of Standards and Technology — This project produces synthetic datasets of spectrum sharing simulation results (I/Q data, metadata, and KPIs).
- 
  
    FederalAsynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imagingNational Institute of Standards and Technology — The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-...
- 
  
    FederalHigh-volume, label-free imaging for quantifying single-cell dynamics in iPSC coloniesNational Institute of Standards and Technology — This collection is comprised of multiple sets of experiments involving iPSCs with varying dosages of fluorescent light excitation. Samples were imaged every 2 minutes...
- 
  
    FederalLinear Axis Testbed - Rail Degradation Experiment 01National Institute of Standards and Technology — In this study, a rail of a linear axis testbed was intentionally degraded to various levels, affecting the carriage motion, which can be deduced with either an...
- 
  
    FederalX-ray computed tomography data of Additive Manufacturing Metrology Testbed (AMMT) parts: Overhang Part X4National Institute of Standards and Technology — This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the four parts built as part of the "Overhang Part X4" in-situ...
- 
  
    FederalSupplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal Powders" by E.J. Garboczi and N. HrabeDepartment of Commerce — Supplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal...
- 
  
    FederalAM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)National Institute of Standards and Technology — One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was...
- 
  
    FederalLiterature experimental data for "Reference Materials for Phase Equilibrium Studies. 2. Solid-Liquid Equilibria (IUPAC Technical Report)"National Institute of Standards and Technology — The data files provide the literature experimental data used to plot the figures, develop and/or verify the models in the following article:A. Bazyleva, W. E. Acree...
- 
  
    FederalNLP-Driven Microscopy Ontology Development - Raw data DOIsNational Institute of Standards and Technology — This dataset contains the DOIs of the corpus, used for the natural language processing analysis described in the article of the same title. The DOIs all point to...
