-
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16 recent views
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition recent views
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
AM Bench 2022 IN625 3D Build Microstructure Modeling Challenge Description Data (AMB2022-05) recent views
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Overhang Part X16 recent views
National Institute of Standards and Technology —
This dataset includes files from the experiment titled OverhangPartX16 pertaining to a three-dimensional (3D) additive manufacturing (AM) build performed on the... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Overhang Part X4 recent views
National Institute of Standards and Technology —
This dataset includes files from the experiment titled 'OverhangPartX4' pertaining to a three-dimensional (3D) additive manufacturing (AM) build performed on the... -
Federal
AM Bench 2022 Residual Elastic Strain, Residual Stress, and Part Deflection Measurements for IN718 3D Builds recent views
National Institute of Standards and Technology —
The following data files include residual elastic strain, residual stress, and part deflection results associated with the 2022 Additive Manufacturing Benchmark test... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds recent views
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam recent views
National Institute of Standards and Technology —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Data Publication: Metallurgical Analysis and Conservation of Turbine Blades from Recovered Apollo F-1 Engines recent views
National Institute of Standards and Technology —
This data set includes data and metadata about a metallurgical analysis and conservation of turbine blades from a recovered F-1 engine from the Apollo 16 Saturn V... -
Federal
Dataset for optical coherence tomography for label-free cell viability measurements in 3D tissue engineering scaffolds recent views
National Institute of Standards and Technology —
In the field of tissue engineering, 3D scaffolds and cells are often combined to yield constructs that are used as therapeutics to repair or restore tissue function... -
Federal
AM Bench 2022 Measurement Results Data: In-situ Thermography and Scan Strategy for Laser-scanned Single Tracks and Pads on Bare In718 (AMB2022-03) recent views
National Institute of Standards and Technology —
The following data files include in-situ thermographic measurement results and various additional experiment design data associated with laser-scanned single tracks... -
Federal
Single-track laser scan cross-sectional micrographs on IN625 and IN718 bare plates with melt pool depth and width measurements recent views
National Institute of Standards and Technology —
Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power,... -
Federal
Enhanced durability of CNT based hierarchical composites subjected to accelerated aging environments. recent views
National Institute of Standards and Technology —
Flexure testing, SEM, FTIR_ATR, Acoustic testing, Electrical testing, XRD, DSC, TGA -
Federal
Data Set: Assessment of Martensitic Transformation Paths Based on Transformation Potential Calculations recent views
National Institute of Standards and Technology —
This data set supports the technical paper and supporting information documents accepted to Steel Research International (https://doi.org/10.1002/srin.201800370). The... -
Federal
Data for manuscript: Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers recent views
National Institute of Standards and Technology —
Experimental and modeling data for manuscript "Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers" by Chad Ropp, Dhriti Maurya, Alexander... -
Federal
Dataset for: A technique for in-situ displacement and strain measurement with laboratory-scale X-ray Computed Tomography recent views
National Institute of Standards and Technology —
This record provides raw and post-processed data used in the associated paper "A technique for in-situ displacement and strain measurement with laboratory-scale X-ray... -
Federal
Characterization of zinc carboxylates in an oil paint test panel [dataset] recent views
National Institute of Standards and Technology —
This dataset contains X-ray EDS (energy dispersive spectroscopy), FTIR (Fourier transform infrared spectroscopy), and DART-MS (Direct analysis in real time mass... -
Federal
Supplemental Data for "Constraining the decline of the lunar dynamo field at ? 3.1 Ga through paleomagnetic analysis of Apollo 12 mare basalts" recent views
National Institute of Standards and Technology —
Supplemental data for the manuscript entitled "Constraining the decline of the lunar dynamo field at ? 3.1 Ga through paleomagnetic analysis of Apollo 12 mare... -
Federal
Code for SerialTrack-XR particle tracking recent views
National Institute of Standards and Technology —
This repository contains scripts for running a custom implementation of "SerialTrack" designed for 2D X-ray projection images taken during in situ micro-X-ray... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness recent views
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM...