Skip to main content
U.S. flag

An official website of the United States government

AM Bench 2022 Residual Elastic Strain, Residual Stress, and Part Deflection Measurements for IN718 3D Builds

Published by National Institute of Standards and Technology | National Institute of Standards and Technology | Catalog Last Checked: September 02, 2026 at 07:18 PM | Dataset Last Updated: August 04, 2022
The following data files include residual elastic strain, residual stress, and part deflection results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench 2022) AMB2022-01 benchmark on laser powder bed fusion (LPBF) 3D builds of nickel-based superalloy IN718 test objects. The AM builds were performed on the NIST Additive Manufacturing Metrology Testbed (AMMT). The residual elastic strains were measured using synchrotron X-ray diffraction at the Cornell High Energy Synchrotron Source (CHESS) and neutron diffraction at the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR). Residual stresses were characterized using the contour method by UC Davis and Hill Engineering. Part deflection after partial cutting of the build part off the build plate was measured at NIST. Detailed descriptions of the build process parameters, scan pattern, heat treatment, and descriptions of all of the AMB2022-01 measurements are provided on the AMB2022-01 challenge description webpage (https://www.nist.gov/ambench/amb2022-01-benchmark-measurements-and-challenge-problems). Due to the time-sensitive nature of the AM Bench challenge problems, those measurements and analyses were prioritized. The challenges that this data publication address are: Residual elastic strain (CHAL-AMB2022-01-RS): Residual elastic strain components at select locations internal to the bridge structure, corresponding to synchrotron X-ray diffraction measurements. Part deflection (CHAL-AMB2022-01-PD): Deflection of the as-built (no heat treatment) bridge structure after it is partially separated from the build plate. Additional datasets that are not required for the challenges will be added soon. For updates, please check back here or at www.nist.gov/ambench.

Resources

27 resources available

Find Related Datasets

Search by Tags

Click any tag below to search for similar datasets

Complete Metadata
@type dcat:Dataset
accessLevel public
bureauCode 
[
  "006:55"
]
contactPoint 
{
  "fn": "Lyle E. Levine",
  "hasEmail": "mailto:lyle.levine@nist.gov"
}
description The following data files include residual elastic strain, residual stress, and part deflection results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench 2022) AMB2022-01 benchmark on laser powder bed fusion (LPBF) 3D builds of nickel-based superalloy IN718 test objects. The AM builds were performed on the NIST Additive Manufacturing Metrology Testbed (AMMT). The residual elastic strains were measured using synchrotron X-ray diffraction at the Cornell High Energy Synchrotron Source (CHESS) and neutron diffraction at the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR). Residual stresses were characterized using the contour method by UC Davis and Hill Engineering. Part deflection after partial cutting of the build part off the build plate was measured at NIST. Detailed descriptions of the build process parameters, scan pattern, heat treatment, and descriptions of all of the AMB2022-01 measurements are provided on the AMB2022-01 challenge description webpage (https://www.nist.gov/ambench/amb2022-01-benchmark-measurements-and-challenge-problems). Due to the time-sensitive nature of the AM Bench challenge problems, those measurements and analyses were prioritized. The challenges that this data publication address are: Residual elastic strain (CHAL-AMB2022-01-RS): Residual elastic strain components at select locations internal to the bridge structure, corresponding to synchrotron X-ray diffraction measurements. Part deflection (CHAL-AMB2022-01-PD): Deflection of the as-built (no heat treatment) bridge structure after it is partially separated from the build plate. Additional datasets that are not required for the challenges will be added soon. For updates, please check back here or at www.nist.gov/ambench.
distribution 
[
  {
    "title": "General description of Residual Elastic Stress/Strain and Part Deflection measurements for AM Bench 2022",
    "mediaType": "application/vnd.openxmlformats-officedocument.wordprocessingml.document",
    "description": "General description of AM Bench 2022 Residual Elastic Strain, Residual Stress, and Part Deflection Measurements for IN718 AM Bench 2022 test artifacts.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2711/AMB2022-01-RS-PD%20measurement%20results_v1.1.docx"
  },
  {
    "title": "2711_README",
    "mediaType": "text/plain",
    "description": "README file describing the contents of this data publication",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2711/2711_README.txt"
  },
  {
    "title": "Readme File",
    "mediaType": "text/plain",
    "description": "Readme file for AM Bench 2022 Residual Elastic Strain, Residual Stress, and Part deflection Measurements for IN718 test artifacts.",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_ZZstrain.eps.sha256"
  },
  {
    "title": "Residual Strain and Part Deflection Measurements for IN718 AM Bench 2022 Test Artifacts",
    "mediaType": "application/pdf",
    "description": "Residual elastic strain and part deflection measurements for IN718 AM Bench 2022 test artifacts. These data are part of the AMB2022-01 set of benchmarks.",
    "downloadURL": "https://data.nist.gov/od/ds/mds2-2711/AMB2022-01-RS-PD%20measurement%20results_v1.1.pdf"
  },
  {
    "mediaType": "application/postscript",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_XXstrain.eps"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_XXstrain.eps.sha256"
  },
  {
    "mediaType": "image/tiff",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_XXstrain.tif"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_XXstrain.tif.sha256"
  },
  {
    "mediaType": "application/postscript",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_ZZstrain.eps"
  },
  {
    "mediaType": "image/tiff",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_ZZstrain.tif"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_ZZstrain.tif.sha256"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_results_V2.txt"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_results_V2.txt.sha256"
  },
  {
    "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_results_V2.xlsx"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB2022_EDD_results_V2.xlsx.sha256"
  },
  {
    "mediaType": "application/postscript",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_XXstrain.eps"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_XXstrain.eps.sha256"
  },
  {
    "mediaType": "image/tiff",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_XXstrain.tif"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_XXstrain.tif.sha256"
  },
  {
    "mediaType": "application/postscript",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_ZZstrain.eps"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_ZZstrain.eps.sha256"
  },
  {
    "mediaType": "image/tiff",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_ZZstrain.tif"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_ZZstrain.tif.sha256"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_results_V2.txt"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_results_V2.txt.sha256"
  },
  {
    "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_results_V2.xlsx"
  },
  {
    "mediaType": "text/plain",
    "downloadURL": "https://data.nist.gov/od/ds/ark:/88434/mds2-2711/Solution%20data%20for%20CHAL-AMB2022-01-RS_v1.0/AMB22_EDD_results_V2.xlsx.sha256"
  }
]
identifier ark:/88434/mds2-2711
issued 2023-05-01
keyword 
[
  "AM-Bench",
  "contour method",
  "diffraction",
  "elastic strain",
  "laser powder bed fusion",
  "part deflection",
  "stress"
]
landingPage https://data.nist.gov/od/id/mds2-2711
language 
[
  "en"
]
license https://www.nist.gov/open/license
modified 2022-08-04 00:00:00
programCode 
[
  "006:045"
]
publisher 
{
  "name": "National Institute of Standards and Technology",
  "@type": "org:Organization"
}
theme 
[
  "Manufacturing:Additive manufacturing",
  "Materials:Metals"
]
title AM Bench 2022 Residual Elastic Strain, Residual Stress, and Part Deflection Measurements for IN718 3D Builds

data.gov

An official website of the GSA's Technology Transformation Services

Looking for U.S. government information and services?
Visit USA.gov