19 datasets found for "Buildings"
-
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
National Institute of Standards and Technology —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
Additive Manufacturing Benchmark Test Series (AM-Bench) 2018 Test Descriptions
National Institute of Standards and Technology —
The Additive Manufacturing Benchmark Test Series (AM-Bench) is developing a continuing series of controlled benchmark tests, in conjunction with a conference series,... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
AM Bench 2022 3D Build Modeling Challenge Description Data (AMB2022-01)
National Institute of Standards and Technology —
The following data files are provided in support of the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) modeling challenges associated with laser... -
Federal
Effects of as-built surface with varying number of contour passes on high-cycle fatigue behavior of additively manufactured nickel alloy 718
National Institute of Standards and Technology —
Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files from the experiment titled OverhangPartX16 pertaining to a three-dimensional (3D) additive manufacturing (AM) build performed on the... -
Federal
AM Bench 2022 Residual Elastic Strain, Residual Stress, and Part Deflection Measurements for IN718 3D Builds
National Institute of Standards and Technology —
The following data files include residual elastic strain, residual stress, and part deflection results associated with the 2022 Additive Manufacturing Benchmark test... -
Federal
Automated Streams Analysis for Public Safety (ASAPS) Dataset (v0.75)
National Institute of Standards and Technology —
The ASAPS Dataset includes eight continuous hours of data from across a fictitious ASAPS City representative of a normal day in a small city. The dataset includes... -
Federal
"module-utilities": A Python package for simplify creating python modules.
National Institute of Standards and Technology —
"module-utilities" is a python package of utilities to simplify working with python packages.The main features of module-utilities are as follows: "cached" module: A... -
Federal
AM Bench 2018 Residual Elastic Strain Measurements of 3D Additive Manufacturing Builds of IN625 Artifacts Using Neutron Diffraction and Synchrotron X-ray Diffraction
National Institute of Standards and Technology —
The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to... -
Federal
Hardware-in-the-loop Laboratory Performance Verification of Flexible Building Equipment in a Typical Commercial Building: Performance of Heating, Ventilation, and Air Conditioning and Thermal Energy Storage Across the United States
National Institute of Standards and Technology —
This high-fidelity dataset measures the holistic load flexibility performance of a suite of commonly used commercial building heating, ventilating, and air-... -
Federal
Three dimensional shape and size X-ray CT database for 1.1 million particles from 17 different lunar regolith simulants
National Institute of Standards and Technology —
Lunar regolith simulants are manufactured in order to provide a higher volume, much less expensive and more available source of material, compared to real lunar... -
Federal
AM Bench 2022 IN625 3D Build Microstructure Modeling Challenge Description Data (AMB2022-05)
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser... -
Federal
"cookiecutter-nist-python": A template for python packages with NIST specific features.
National Institute of Standards and Technology —
The "cookiecutter-nist-python" template includes all NIST specific branding for creating a pythonpackage. Features include: Testing with pytest. Isolated testing,... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Data from "High-temperature tensile constitutive data and models for structural steels in fire (NIST Technical Note 1714)"
National Institute of Standards and Technology —
The National Institute of Standards and Technology, as part of its report on the collapse of the World Trade Center, characterized many important steels recovered...
19 datasets found for "Buildings"