10 datasets found for "亚洲博彩公司✅澳门葡京赌场官方网站-网址【079.one】㊙️最火爆PG电子超高爆奖率，注册即送38元.jPLLnDoHxrGSddL"
-
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
AM Bench 2022 Microstructure Measurements for IN718 3D builds
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) AMB2022-01... -
Federal
Broadband Electromagnetic Properties of Engineered Flexible Absorber Materials
National Institute of Standards and Technology —
Figures and relevant data from the paper "Broadband Electromagnetic Properties of Engineered Flexible Absorber Materials" are found here . The paper was published on... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
National Institute of Standards and Technology —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Optical scattering measurements and simulation data for one-dimensional (1-D) patterned periodic sub-wavelength features
National Institute of Standards and Technology —
This data set consists of both measured and simulated optical intensities scattered off periodic line arrays, with simulations based upon an average geometric model... -
Federal
AM Bench 2018 Residual Elastic Strain Measurements of 3D Additive Manufacturing Builds of IN625 Artifacts Using Neutron Diffraction and Synchrotron X-ray Diffraction
National Institute of Standards and Technology —
The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to... -
Federal
Effects of as-built surface with varying number of contour passes on high-cycle fatigue behavior of additively manufactured nickel alloy 718
National Institute of Standards and Technology —
Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a... -
Federal
UV-visible absorbance spectra of purified and unpurified m-cresol purple samples in sodium hydroxide and sodium chloride solutions at pH 12
National Institute of Standards and Technology —
M-cresol purple is the most widely used pH indicator dye for seawater pH measurements. Impurities in the indicator are known to absorb strongly at one of the...
10 datasets found for "亚洲博彩公司✅澳门葡京赌场官方网站-网址【079.one】㊙️最火爆PG电子超高爆奖率，注册即送38元.jPLLnDoHxrGSddL"