250 datasets found for "l44텔레DaisoDBIIㄱ로또디비ㅣll"
-
Federal
Complex Document Information Processing (CDIP) dataset
National Institute of Standards and Technology —
This dataset is called the "IIT CDIP collection". "CDIP" stands for "Complex Document Information Processing" and "IIT" stands for "Illinois Institute of Technology"... -
Federal
Process and robot data from a two robot workcell representative performing representative manufacturing operations.
National Institute of Standards and Technology —
This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-... -
Federal
Uplink IQ Recordings
National Institute of Standards and Technology —
This data is provided as a supplement to NIST Technical Note 2159 Laboratory Method for Recording AWS-3 LTE Waveforms available at... -
Federal
LTE and Wi-Fi coexistence measurement data
National Institute of Standards and Technology —
This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-... -
Federal
Mapping of NIST Cybersecurity Framework v1.1 to NERC CIP Reliability Standards
National Institute of Standards and Technology —
THIS DATASET IS OBSOLETE. PLEASE REFERENCE THE NEWER MAPPING IN OLIR (https://doi.org/10.18434/mds2-3215).The spreadsheets in this data set map National Institute of... -
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Segmentation of lipid nanoparticles from cryogenic electron microscopy images
National Institute of Standards and Technology —
Lipid nanoparticles (LNPs) were prepared as described (https://doi.org/10.1038/s42003-021-02441-2) using the lipids DLin-KC2-DMA, DSPC, cholesterol, and PEG-DMG2000... -
Federal
Data for "Distributed contactless interconnects for millimeter-wave heterogeneous integration"
Department of Commerce —
Included here are figures and other relevant data from the paper "Distributed contactless interconnects for millimeter-wave heterogeneous integration", submitted to... -
Federal
MAM Consortium Interlaboratory Study Raw Data
National Institute of Standards and Technology —
These LC-MS and LC-MS/MS raw data were collected for purposes of an interlaboratory study evaluating the multi-attribute method (MAM). Tryptic digests of native... -
Federal
Additively manufactured CoCr lattice artifact -- 3D design
National Institute of Standards and Technology —
SolidWorks Part file (CAD file) for a CoCr "lattice" structure additively manufactured in a laser bed powder fusion (LPBF) system at NIST. -
Federal
Data and code for "Predicting the toughness of compatibilized polymer blends"
National Institute of Standards and Technology —
This code and example files were used to run the self-consistent field theory parameterization in the publication "Predicting the toughness of compatibilized polymer... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): 3D Scan Strategies
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing build performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on July... -
Federal
AM Bench 2022 Measurement Results Data: 3D Builds In-situ Thermography and Data Processing Scripts (AMB2022-01)
National Institute of Standards and Technology —
The following data files include in-situ thermographic measurement results, scan strategy, and various additional data associated with laser powder bed fusion (LPBF)...
250 datasets found for "l44텔레DaisoDBIIㄱ로또디비ㅣll"