-
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
precisionFDA Truth Challenge V2: Calling variants from short- and long-reads in difficult-to-map regions
National Institute of Standards and Technology —
The precisionFDA Truth Challenge V2 aimed to assess the state-of-the-art of variant calling in difficult-to-map regions and the Major Histocompatibility Complex... -
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
Radio Access Network Anomalous State Detection Dataset
National Institute of Standards and Technology —
This project [1] produced two types of data: Working Data and Derived Data. The Working Data includes raw measurements collected from a Radio Access Network (RAN)... -
Federal
Tables from "Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922-1940 and Relevance to Pipeline Management" (NISTIR 7415)
Department of Commerce —
Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground... -
Federal
High-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parameters
National Institute of Standards and Technology —
This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
OpenFOAM simulations of filament fusion in embedded 3D printing
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. However, moving the nozzle near an existing... -
Federal
Vimeo Creative Commons Collection (V3C2)
National Institute of Standards and Technology —
The V3C2 dataset (drawn from a larger V3C video dataset) is composed of 9760 Vimeo videos (1.6 TB, 1300 h) with Creative Commons licenses and mean duration of 8 min.... -
Federal
Vimeo Creative Commons Collection (V3C1)
National Institute of Standards and Technology —
The V3C1 dataset (drawn from a larger V3C video dataset) is composed of 7475 Vimeo videos (1.3 TB, 1000 h) with Creative Commons licenses and mean duration of 8 min.... -
Federal
Vimeo Creative Commons Collection (V3C1)
Department of Commerce —
The V3C1 dataset (drawn from a larger V3C video dataset) is composed of 7475 Vimeo videos (1.3 TB, 1000 h) with Creative Commons licenses and mean duration of 8 min.... -
Federal
SHREC'11 Track: Shape Retrieval on Non-rigid 3D Watertight Meshes
National Institute of Standards and Technology —
Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing... -
Federal
MAM Consortium Interlaboratory Study Raw Data
National Institute of Standards and Technology —
These LC-MS and LC-MS/MS raw data were collected for purposes of an interlaboratory study evaluating the multi-attribute method (MAM). Tryptic digests of native... -
Federal
NIST Public Data Inventory
Department of Commerce —
National Institute of Standards and Technology (NIST) public data inventory is a catalog of digital products generated from the NIST enterprise data inventory (EDI).... -
Federal
AM Bench 2022 Measurement Results Data: 3D Builds In-situ Thermography and Data Processing Scripts (AMB2022-01)
National Institute of Standards and Technology —
The following data files include in-situ thermographic measurement results, scan strategy, and various additional data associated with laser powder bed fusion (LPBF)... -
Federal
SHREC'12 Track: Sketch-Based 3D Shape Retrieval
Department of Commerce —
The objective of this SHREC'12 track is to evaluate the performance of different sketch-based 3D model retrieval algorithms using both hand-drawn and standard line... -
Federal
Thermodynamic Data from Unpublished Sources to Support the New Reference Equation of State for Carbon Dioxide
National Institute of Standards and Technology —
During work on the new reference equation of state for carbon dioxide [E.W. Lemmon, A.H. Harvey, and R. Hellmann, NIST Internal Report, to be published in 2025], we... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Measurement Dataset for A Wireless Gantry System
Department of Commerce —
This dataset includes the position data of a two-dimensional gantry system experiment in which the G-code commands for the gantry were transmitted through a wireless...