-
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI Units
National Institute of Standards and Technology —
Recommended values are provided for chemical thermodynamic properties of inorganic substances and for organic substances usually containing only one or two carbon... -
Federal
NIST SRD 46. Critically Selected Stability Constants of Metal Complexes: Version 8.0 for Windows
National Institute of Standards and Technology —
This version of NIST Standard Reference Database 46 is a major enhancement to this widely used database which provides comprehensive coverage of interactions for... -
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
Data from: NIST Properties of Molten Salts Database (formerly SRD 27)
National Institute of Standards and Technology —
NIST distributed the NIST Properties of Molten Salts Database from 1990 to 2004. As part of the NIST Standard Reference Data Program, the database was designated as... -
Federal
ThermoML/Data Archive
National Institute of Standards and Technology —
ThermoML is an XML-based IUPAC standard for the storage and exchange of experimental thermophysical and thermochemical property data. The ThermoML archive is a subset... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
The NIST Extensible Resource Data Model (NERDm): JSON schemas for rich description of data resources
National Institute of Standards and Technology —
The NIST Extensible Resource Data Model (NERDm) is a set of schemas for encoding in JSON format metadatathat describe digital resources. The variety of digital... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Data and code for "Predicting the toughness of compatibilized polymer blends"
National Institute of Standards and Technology —
This code and example files were used to run the self-consistent field theory parameterization in the publication "Predicting the toughness of compatibilized polymer... -
Federal
Data for NIST Technical Note: Validation and Optimization with a Vapor Compression Cycle Model Accounting for Refrigerant Thermodynamic and Transport Properties
National Institute of Standards and Technology —
This data set includes (1) Experimental measurements, and (2) Simulation data. The experimental data set shows raw measurements and important calculated parameters.... -
Federal
NIST High Temperature Superconducting (HTS) Materials Database - SRD 62
National Institute of Standards and Technology —
The NIST WWW High Temperature Superconductors database (WebHTS) provides evaluated thermal, mechanical, and superconducting property data for oxide superconductors.... -
Federal
Atomic Model Structure of Intact Monoclonal Antibody Reference Material 8671 (NISTmAb)
National Institute of Standards and Technology —
As monoclonal antibodies have become a vital resource in medicine, knowledge of their complex molecular structures has increased in importance. Thousands of Fab and... -
Federal
Experimental data sets for viscosity and surface tension of binary mixtures at the temperatures (293.15 to 323.15) K and the pressures (99.325 to 103.325) kPa
National Institute of Standards and Technology —
This is a research data set extracted from NIST Standard Reference Database 103b and contains raw experimental data for viscosity and surface tension of binary mixtures. -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Evaluation of static and dynamic magnetic properties of CoFeB versus thickness
National Institute of Standards and Technology —
The enclosed dataset includes measurements of a thickness series of CoFeB thin film samples that were deposited at the NIST Magnetic Engineering Research Facility... -
Federal
Bicyclohexyl: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research...