- 
  
    FederalNIST Handprinted Forms and Characters - NIST Special Database 19Department of Commerce — Special Database 19 contains NIST's entire corpus of training materials for handprinted document and character recognition. It publishes Handprinted Sample Forms from...
- 
  
    FederalDynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heatingNational Institute of Standards and Technology — This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy...
- 
  
    FederalNIST SAMATE Software Assurance Reference DatasetNational Institute of Standards and Technology — This dataset provides the NIST Software Assurance Metrics And Tool Evaluation (SAMATE) Software Assurance Reference Dataset (SARD) - a set of programs with known...
- 
  
    FederalNIST CAD Models and STEP Files with PMINational Institute of Standards and Technology — NIST has created a Test System to measure conformance of Computer-Aided Design (CAD) software to American Society of Mechanical Engineers (ASME) standards for Product...
- 
  
    FederalThermoData Engine free public versionNational Institute of Standards and Technology — A computer program for accessing and visualization of thermodynamic and transport property data for chemical compounds and mixtures available at the TRC/NIST ThermoML...
- 
  
    FederalThermal Drift Monitoring Experiment 01National Institute of Standards and Technology — An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A...
- 
  
    FederalDICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.National Institute of Standards and Technology — DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own...
- 
  
    FederalProcess Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF ExperimentNational Institute of Standards and Technology — This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on...
- 
  
    FederalRadio Access Network Anomalous State Detection DatasetNational Institute of Standards and Technology — This project [1] produced two types of data: Working Data and Derived Data. The Working Data includes raw measurements collected from a Radio Access Network (RAN)...
- 
  
    FederalDataset: An Inter-Laboratory Study of Zn-Sn-Ti-O Thin Films using High-throughput Experimental MethodsNational Institute of Standards and Technology — The open dataset accompanying An Inter-Laboratory Study of Zn-Sn-Ti-O Thin Films using High-throughput Experimental Methods...
- 
  
    FederalLTE and Wi-Fi coexistence measurement dataNational Institute of Standards and Technology — This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-...
- 
  
    FederalLinear Axis Testbed at IMS Center - Run-to-Failure Experiment 01National Institute of Standards and Technology — A linear axis testbed at the Center for Intelligent Maintenance Systems (IMS Center) at the University of Cincinnati was run to failure (the detection of backlash)...
- 
  
    FederalSHREC'11 Track: Shape Retrieval on Non-rigid 3D Watertight MeshesNational Institute of Standards and Technology — Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing...
- 
  
    FederalA Fully Registered In-Situ and Ex-Situ Dataset for Metal Powder Bed Fusion Additive Manufacturing: Data Processing, Feature Extraction, Registration, and UncertaintiesNational Institute of Standards and Technology — This document details the data registration process for the previously published datasets from Additive Manufacturing Metrology Testbed (AMMT) parts, "Overhang Part...
- 
  
    FederalSimulated X-ray computed tomography (XCT) and ground truth images of cylindrical sample with randomly distributed spherical poresNational Institute of Standards and Technology — X-ray computed tomography (XCT) datasets with known ground truth pores were developed using realistic XCT simulation. Non-overlapping spherical pores of varying sizes...
- 
  
    Federal3D shape and size data for 10084 and 14163 lunar regolith particlesNational Institute of Standards and Technology — This database contains 3D shape and size data for 10084 (Apollo 11) and 14163 (Apollo 14) real lunar regolith particles, along with STL files for the approximately...
- 
  
    FederalCMOS Sky130 Primitives measured at cryogenic temperaturesNational Institute of Standards and Technology — Sky130 is an open source complimentary metal oxide semiconductor (CMOS) technology manufactured by Skywater Technology in its facility in Bloomington, Minnesota....
- 
  
    FederalDistributed Sensing of Radio Spectrum Occupancy Amid COVID-19National Institute of Standards and Technology — During the COVID-19 pandemic, National Institute of Standards and Technology (NIST) performed a targeted campaign of measurements of channel power and occupancy rate...
- 
  
    FederalHigh-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parametersNational Institute of Standards and Technology — This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion...
- 
  
    FederalSysML Model Libraries Supporting Discrete Event Logistics Systems (DELS) ModelsNational Institute of Standards and Technology — System models and model-based engineering methods have the promise of transforming the way that industrial engineers interact with production and logistics systems....
