-
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition recent views
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Generator Fleet Characteristics Model recent views
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
"module-utilities": A Python package for simplify creating python modules. recent views
National Institute of Standards and Technology —
"module-utilities" is a python package of utilities to simplify working with python packages.The main features of module-utilities are as follows: "cached" module: A... -
Federal
Data Publication: Metallurgical Analysis and Conservation of Turbine Blades from Recovered Apollo F-1 Engines recent views
National Institute of Standards and Technology —
This data set includes data and metadata about a metallurgical analysis and conservation of turbine blades from a recovered F-1 engine from the Apollo 16 Saturn V... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO) recent views
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
AM Bench 2022 ASTM E8 Macroscale Tension at Different Strain Rates on As-built IN625 recent views
National Institute of Standards and Technology —
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are... -
Federal
NIST DART-MS Forensics Database (is-CID) recent views
National Institute of Standards and Technology —
The NIST DART-MS Forensics Database is an evaluated collection of in-source collisionally-induced dissociation (is-CID) mass spectra of compounds of interest to the... -
Federal
AM Bench 2022 IN625 3D Build Microstructure Modeling Challenge Description Data (AMB2022-05) recent views
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16 recent views
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
GIAB Benchmarking of HG002 Assemblies from HPRC Year 1 Bakeoff recent views
National Institute of Standards and Technology —
The Human Pangenome Reference Consortium (HPRC) tested which combination of current genome sequencing and automated assembly approaches yields the most complete,... -
Federal
2,2'-Dimethylbiphenyl: Experimental and Derived Thermodynamic Properties recent views
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Data Set: Assessment of Martensitic Transformation Paths Based on Transformation Potential Calculations recent views
National Institute of Standards and Technology —
This data set supports the technical paper and supporting information documents accepted to Steel Research International (https://doi.org/10.1002/srin.201800370). The... -
Federal
AM Bench 2022 Residual Elastic Strain, Residual Stress, and Part Deflection Measurements for IN718 3D Builds recent views
National Institute of Standards and Technology —
The following data files include residual elastic strain, residual stress, and part deflection results associated with the 2022 Additive Manufacturing Benchmark test... -
Federal
A dual chirped-pulse electro-optical frequency comb method for simultaneous molecular spectroscopy and dynamics studies: Formic acid in the THz region recent views
National Institute of Standards and Technology —
Data associated with figures in Optics Letters 2022 publication "A dual chirped-pulse electro-optical frequency comb method for simultaneous molecular spectroscopy... -
Federal
Blind Calibration of Phase Drift in Millimeter-Wave Channel Sounders recent views
National Institute of Standards and Technology —
Millimeter-wave channel sounders are much more sensitive to phase drift than their microwave counterparts by virtue of shorter wavelength. This matters when... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment recent views
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
AM Bench 2022 3D Build Modeling Challenge Description Data (AMB2022-01) recent views
National Institute of Standards and Technology —
The following data files are provided in support of the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) modeling challenges associated with laser... -
Federal
Genome In A Bottle - v3.0 Genome Stratifications recent views
National Institute of Standards and Technology —
These v3.0 stratification BED files from the Global Alliance for Genomic Health (GA4GH) Benchmarking Team, the Genome in a Bottle Consortium and the Telomere-to-... -
Federal
AM Bench 2022: Cross sectional microstructure of single laser tracks produced using different processing conditions and 2D arrays of laser tracks (pads) on solid plates of nickel alloy 718 recent views
National Institute of Standards and Technology —
The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench 2022) AMB2022-03...