Catalog - Data.gov

#1 Federal

AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V

Organization: National Institute of Standards and Technology
Dataset Last Updated: February 18, 2025

Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a non-standard hot isostatic...

Search relevance: 1.00 | Views last month: 27 | Catalog Last Checked: August 02, 2025 at 03:55 PM

#2 Federal

Thermographic measurements of single and multiple scan tracks on nickel alloy 625 substrates with and without a powder layer in a commercial laser powder bed fusion process (an additive manufacturing technology)

Organization: National Institute of Standards and Technology
Dataset Last Updated: September 06, 2017

This dataset contains thermographic measurements acquired during single and multiple track scans on bare substrates and on single layers of powder. The substrates and powder are nickel alloy 625...

Search relevance: 1.00 | Views last month: 5 | Catalog Last Checked: August 02, 2025 at 01:50 PM

#3 Federal

AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718

Organization: National Institute of Standards and Technology
Dataset Last Updated: February 18, 2025

This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were...

Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 02, 2025 at 03:56 PM

#4 Federal

In situ thermography of the metal bridge structures fabricated for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018)

Organization: National Institute of Standards and Technology
Dataset Last Updated: September 14, 2018

These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench). This dataset and the associated experiments are part of a continuing series of...

Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: August 02, 2025 at 01:57 PM

#5 Federal

In Situ Thermography of Single Scan Tracks Performed on Nickel Super Alloy 625 for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018): Powder Bed Fusion Commercial Build Machine

Organization: National Institute of Standards and Technology
Dataset Last Updated: May 18, 2018

These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry challenge (CHAL-AMB2018-02-MP) and...