Search datasets
-
These sets of automated serial sectioning electron backscatter diffraction (EBSD) and X-ray computed tomography (XRCT) measurements were designed to produce spatially registered, multi-modal...
Search relevance: 1.00 | Views last month: 18 | Catalog Last Checked: September 10, 2026 at 05:52 PM -
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are provided in this data publication....
Search relevance: 1.00 | Views last month: 9 | Catalog Last Checked: September 10, 2026 at 05:52 PM -
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens were extracted from blocks at...
Search relevance: 1.00 | Views last month: 6 | Catalog Last Checked: September 10, 2026 at 05:52 PM -
The following optical micrograph data files are provided in support of the AM Bench 2018 modeling challenges associated with bare plate single track laser scans performed on the NIST Additive...
Search relevance: 1.00 | Views last month: 6 | Catalog Last Checked: September 10, 2026 at 05:53 PM -
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was extracted from build...
Search relevance: 1.00 | Views last month: 5 | Catalog Last Checked: September 10, 2026 at 05:52 PM -
The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to widespread adoption. Accurate...
Search relevance: 1.00 | Views last month: 5 | Catalog Last Checked: September 10, 2026 at 05:52 PM -
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625 AMB2018-01 build in both the build...
Search relevance: 1.00 | Views last month: 3 | Catalog Last Checked: September 10, 2026 at 05:52 PM -
The dataset is melt pool cross-sectional microscopy and measurements for 2D arrays of laser tracks on solid metal IN718 plates and single layers of IN718 powder on solid metal IN718 plates. The...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:54 PM -
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are provided in this data publication....
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:52 PM -
This data publication includes the AM Bench answer key for two AMB2025-01 Challenge Problems that were posed to the AM modeling community: Microstructure Upon Stress Relief (CHAL-AMB2025-01-SR):...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: September 10, 2026 at 05:53 PM -
This Photopolymer AM Bench-2025 Challenge is to predict the cure depth versus radiant exposure (often called dose) of prototypical resins with varying monomer functionality and photoabsorber type,...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: September 10, 2026 at 05:53 PM -
These sets of automated serial sectioning electron backscatter diffraction (EBSD) and X-ray computed tomography (XRCT) measurements were designed to produce spatially registered, multi-modal...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:52 PM -
The following data files include mechanical behavior and corresponding X-ray diffraction measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench)...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:52 PM -
The following optical micrograph data files are provided in support of the AM Bench 2018 modeling challenges associated with bare plate single track laser scans performed on the NIST Additive...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:54 PM -
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was extracted from build...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:52 PM -
The dataset is melt pool cross-sectional microscopy and measurements for 2D arrays of laser tracks on solid metal IN718 plates and single layers of IN718 powder on solid metal IN718 plates. The...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: September 10, 2026 at 05:53 PM -
The following data files include mechanical behavior and corresponding X-ray diffraction measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench)...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: September 10, 2026 at 05:52 PM -
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625 AMB2018-01 build in both the build...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:52 PM -
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens were extracted from blocks at...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:52 PM -
This data publication includes the AM Bench answer key for two AMB2025-01 Challenge Problems that were posed to the AM modeling community: Microstructure Upon Stress Relief (CHAL-AMB2025-01-SR):...
Search relevance: 1.00 | Views last month: 0 | Catalog Last Checked: October 02, 2026 at 07:54 PM
