5 datasets found
-
Federal
In situ thermography of the metal bridge structures fabricated for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018)
National Institute of Standards and Technology —
These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench). This dataset and the associated experiments are part of... -
Federal
In Situ Thermography of Single Scan Tracks Performed on Nickel Super Alloy 625 for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018): Powder Bed Fusion Commercial Build Machine
National Institute of Standards and Technology —
These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry... -
Federal
AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718
National Institute of Standards and Technology —
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-... -
Federal
Thermographic measurements of single and multiple scan tracks on nickel alloy 625 substrates with and without a powder layer in a commercial laser powder bed fusion process (an additive manufacturing technology)
National Institute of Standards and Technology —
This dataset contains thermographic measurements acquired during single and multiple track scans on bare substrates and on single layers of powder. The substrates and... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a...
5 datasets found