45 datasets found
-
Federal
TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials
Department of Energy —
The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD)... -
Federal
H3 StingRAY Final Design and Technical Report
Department of Energy —
The goal of this Project was to develop a standards-compliant, fabrication-ready design of Columbia Power Technologies' (C-Power) next-generation wave energy... -
Federal
Triton Point Absorber 1:30 Scale Tank Test Data for Extreme Wave Environments
Department of Energy —
This content model summarizes laboratory testing data for the Oscilla Power Triton WEC conducted at 1:30 scale. The WEC was tested in large operational waves and in... -
Federal
Reference Model 3 Full Scale Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) full scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These full scale geometry... -
Federal
Centipod WEC, Advanced Controls, WEC Geometry CAD
Department of Energy —
CAD files depicting the wetted geometry of the Centipod WEC used in numerical models during this project. This includes the wetted geometry of the point absorber body... -
Federal
Evaluation of a Wave Powered Water Pump Performance by Ocean Field Testing and WEC-Sim Modeling
Department of Energy —
This submission from AMEC (the Atlantic Marine Energy Center) includes data from an ocean field deployment of a wave powered water pump in March 2023. The wave pump... -
Federal
HERO WEC V1 Upgrades - SolidWorks Models (WEC, RO System, and Submersible Pump Housing)
Department of Energy —
The attached zip files include SolidWorks pack-and-go assemblies of NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter), the reverse... -
Federal
HERO WEC V1.0 - WEC-Sim Model (July 2024)
Department of Energy —
This submission supersedes submission MHKDR-483 This submission file contains the files that are needed to simulate NREL's HERO WEC (hydraulic and... -
Federal
Small Scale WEC Performance Modeling Data
Department of Energy —
Small Scale WEC Performance Modeling Data is performance data from downscaled models of common WEC devices and their calculated performance outputs. This data is used... -
Federal
Reference Model 3 Cost Breakdown (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM3 device... -
Federal
Performance estimation of resonance-enhanced dual-buoy wave energy converter using coupled time-domain simulation
Department of Energy —
This paper presents the modeling methodology and performance evaluation of the resonance-enhanced dual-buoy WEC (Wave Energy Converter) by HEM (hydrodynamic &... -
Federal
HERO WEC V1.0 - SolidWorks Model
Department of Energy —
The attached zip file includes a SolidWorks pack-and-go assembly of NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter) V1.0. This model... -
Federal
RM3 Wave Tank Validation Model
Department of Energy —
An approximately 1/75th scale point absorber wave energy absorber was built to validate the testing systems of a 16k gallon single paddle wave tank. The model was... -
Federal
Laboratory Upgrade Point Absorber WEC-Sim Model with MoorDyn Moorings
Department of Energy —
This dataset includes a WEC-Sim and MoorDyn model of the Laboratory Upgrade Point Absorber (LUPA). LUPA is an open-source wave energy converter designed and tested by... -
Federal
Centipod WEC, Advanced Controls, MPC Controller MATLAB Code
Department of Energy —
This archive contains the MATLAB code for the model predictive control (MPC) controller developed in this project. The archive containing the WaveDyn models used for...
45 datasets found