8 datasets found
-
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
Department of Commerce —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Macroscale Compression at Different Temperatures and Orientations (CHAL-AMB2022-04-MaCTO)
National Institute of Standards and Technology —
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625... -
Federal
AM Bench 2022 ASTM E8 Macroscale Tension at Different Strain Rates on As-built IN625
National Institute of Standards and Technology —
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are... -
Federal
AM Bench 2022 ASTM E8 Macroscale Tension at Different Strain Rates on As-built IN625
Department of Commerce —
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Macroscale Compression at Different Temperatures and Orientations (CHAL-AMB2022-04-MaCTO)
Department of Commerce —
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
Department of Commerce —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was...
8 datasets found