-
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Data for figures in the AMTA 2023 conference paper titled "NIST Antenna Gain and Polarization Calibration Service Reinstatement"
Department of Commerce —
After a five-year renovation of the National Institute of Standards and Technology (NIST) Boulder, CO, antenna measurement facility, the Antenna On-Axis Gain and... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
Generator Fleet Characteristics Model
Department of Commerce —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
Department of Commerce —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
U.S. population data for human identification markers
National Institute of Standards and Technology —
The primary data consist of allele or haplotype frequencies for N=1036 anonymized U.S. population samples. Additional files are supplements to the associated... -
Federal
9,10-Dihydroanthracene: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Data for the paper "EIT spectra of Rydberg atoms dressed with dual tone radio-frequency fields"
National Institute of Standards and Technology —
This dataset contains the data for the figures in the paper "EIT spectra of Rydberg atoms dressed with dual tone radio-frequency fields", submitted to Physical Review... -
Federal
AM Bench 2022 IN625 3D Build Microstructure Modeling Challenge Description Data (AMB2022-05)
Department of Commerce —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser... -
Federal
1,2,3,4,5,6,7,8-Octahydroanthracene: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
1,2,3,4-Tetrahydrophenanthrene: Experimental and Derived Thermodynamic Properties
Department of Commerce —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Results of flow-FISH for RNA degradation
Department of Commerce —
Flow cytometry measurements of FISH-labeled RNA at timepoints following rifampicin addition. These data folders contain raw data (.fcs files), analysis files, and... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Hot-wire anemometer gas speed measurements in a commercial laser powder bed fusion machine
National Institute of Standards and Technology —
Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and... -
Federal
Electromagnetic Interference Measurements from Tungsten Inert Gas (TIG) Arc Welding
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. Our dataset contains comprehensive... -
Federal
Data from "High-temperature tensile constitutive data and models for structural steels in fire (NIST Technical Note 1714)"
Department of Commerce —
The National Institute of Standards and Technology, as part of its report on the collapse of the World Trade Center, characterized many important steels recovered... -
Federal
Genome In A Bottle - v3.0 Genome Stratifications
Department of Commerce —
These v3.0 stratification BED files from the Global Alliance for Genomic Health (GA4GH) Benchmarking Team, the Genome in a Bottle Consortium and the Telomere-to-... -
Federal
Evaluating Correlation Between Measurement Samples in Reverberation Chambers Using Clustering
Department of Commerce —
Evaluating Correlation Between Measurement Samples in Reverberation Chambers Using ClusteringAbstract: Traditionally, in reverberation chambers (RC) measurement...