-
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
The NBS Tables of Chemical Thermodynamic Properties: Selected Values for Inorganic and C1 and C2 Organic Substances in SI Units
National Institute of Standards and Technology —
Recommended values are provided for chemical thermodynamic properties of inorganic substances and for organic substances usually containing only one or two carbon... -
Federal
precisionFDA Truth Challenge V2: Calling variants from short- and long-reads in difficult-to-map regions
National Institute of Standards and Technology —
The precisionFDA Truth Challenge V2 aimed to assess the state-of-the-art of variant calling in difficult-to-map regions and the Major Histocompatibility Complex... -
Federal
LTE and Wi-Fi coexistence measurement data
National Institute of Standards and Technology —
This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-... -
Federal
Complex Document Information Processing (CDIP) dataset
National Institute of Standards and Technology —
This dataset is called the "IIT CDIP collection". "CDIP" stands for "Complex Document Information Processing" and "IIT" stands for "Illinois Institute of Technology"... -
Federal
Atomic Model Structure of Intact Monoclonal Antibody Reference Material 8671 (NISTmAb)
National Institute of Standards and Technology —
As monoclonal antibodies have become a vital resource in medicine, knowledge of their complex molecular structures has increased in importance. Thousands of Fab and... -
Federal
GIAB Benchmarking of HG002 Assemblies from HPRC Year 1 Bakeoff
National Institute of Standards and Technology —
The Human Pangenome Reference Consortium (HPRC) tested which combination of current genome sequencing and automated assembly approaches yields the most complete,... -
Federal
Observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions from the Los Angeles Megacity Carbon Project
Department of Commerce —
Updated April 2025. Here we provide hourly observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions in dry air from tower- and... -
Federal
Generator Fleet Characteristics Model
Department of Commerce —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Dataset for Absorbance Microscopy for Quantitative and Traceable Trypan Blue Cell Viability Measurement
National Institute of Standards and Technology —
The use of the microscope to assess cell viability is an inherently qualitative and subjective process. This project demonstrates a new absorbance microscopy modality... -
Federal
X-ray computed tomography data of Additive Manufacturing Metrology Testbed (AMMT) parts: Overhang Part X4
Department of Commerce —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the four parts built as part of the "Overhang Part X4" in-situ... -
Federal
Segmentation of lipid nanoparticles from cryogenic electron microscopy images
National Institute of Standards and Technology —
Lipid nanoparticles (LNPs) were prepared as described (https://doi.org/10.1038/s42003-021-02441-2) using the lipids DLin-KC2-DMA, DSPC, cholesterol, and PEG-DMG2000... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
Department of Commerce —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Additive Manufacturing Benchmark Test Series (AM-Bench) 2018 Test Descriptions
National Institute of Standards and Technology —
The Additive Manufacturing Benchmark Test Series (AM-Bench) is developing a continuing series of controlled benchmark tests, in conjunction with a conference series,... -
Federal
SHREC'11 Track: Shape Retrieval on Non-rigid 3D Watertight Meshes
National Institute of Standards and Technology —
Non-rigid 3D objects are commonly seen in our surroundings. However, previous efforts have been mainly devoted to the retrieval of rigid 3D models, and thus comparing... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
Department of Commerce —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Dataset for Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment
National Institute of Standards and Technology —
This data is associated with the manuscript titled Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment. The abstract of...