27 datasets found for "43d텔howDBlI코인DB문의%"
-
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Forecasting demand data for critical materials
Department of Commerce —
Clean energy technologies (e.g., solar, wind, EVs) are vital in our transition to a decarbonized energy grid. Many clean energy technologies rely on critical... -
Federal
Tables from "Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922-1940 and Relevance to Pipeline Management" (NISTIR 7415)
National Institute of Standards and Technology —
Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
PSCR Usability Project_Voices of First Responders
National Institute of Standards and Technology —
The Usability Team of the National Institute of Standards and Technology's (NIST) Public Safety Communications Research (PSCR) program works to identify issues faced... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
National Institute of Standards and Technology —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
OpenFOAM simulations of stress mitigation strategies in embedded 3D bioprinting
Department of Commerce —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Embedded 3D printing is particularly useful for... -
Federal
Data Publication: Data from NIST IR "Report on VAMAS Round Robin of ISO 13067: Microbeam Analysis - Electron Backscatter Diffraction - Measurement of Average Grain Size"
Department of Commerce —
This data publication includes electron backscatter diffraction (EBSD) data used to support the development of ISO 13067 "Microbeam Analysis - Electron Backscatter... -
Federal
Data and Code for Analysis presented in NIST TN 2137: Quantifying Operational Resilience Benefits of the Smart Grid
Department of Commerce —
This MIDAS object contains all the data inputs and code necessary to replicate the findings presented in NIST TN2137 using the statistical software Stata. -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #2)
National Institute of Standards and Technology —
The National Institute of Standards and Technology conducted a series of large compartment fire tests to investigate the behavior and fire-induced failure mechanisms... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Data set of Flow Resistance Measurements of Vegetation
National Institute of Standards and Technology —
This data set reports measurements of the drag coefficient and geometric parameters of different types of vegetation. The vegetation chosen for this work was a Bakers... -
Federal
Effects of Thermal Aging on Molar Mass of Ultra-High Molar Mass Polyethylene Fibers
National Institute of Standards and Technology —
Data associated with experiments to examine the effect of thermal aging on the molar mass of ultra-high molar mass polyethylene fibers. -
Federal
Generator Fleet Characteristics Model
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Hydrogen-Deuterium Exchange Mass Spectrometry (HDX-MS) Centroid Data measured between 3.6 degrees C and 25.4 degrees C for the Fab Fragment of NISTmAb
National Institute of Standards and Technology —
The spreadsheet file reported herein provides centroid data, descriptive of deuterium uptake, for the Fab Fragment of NISTmAb (PDB: 5K8A) reference material, as... -
Federal
OpenFOAM simulations of stress mitigation strategies in embedded 3D bioprinting
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Embedded 3D printing is particularly useful for... -
Federal
A Materials Properties Dataset for Elastomeric Foam Impact Mitigating Materials
National Institute of Standards and Technology —
The database includes mechanical data for structure-properties relationships and mechanical modeling of elastic impact protection foams from a variety of imaging... -
Federal
High-volume, label-free imaging for quantifying single-cell dynamics in iPSC colonies
Department of Commerce —
This collection is comprised of multiple sets of experiments involving iPSCs with varying dosages of fluorescent light excitation. Samples were imaged every 2 minutes... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
Department of Commerce —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-...
27 datasets found for "43d텔howDBlI코인DB문의%"