-
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
ThermoData Engine free public version
National Institute of Standards and Technology —
A computer program for accessing and visualization of thermodynamic and transport property data for chemical compounds and mixtures available at the TRC/NIST ThermoML... -
Federal
Design, Manufacturing, and Inspection Data for a Box Assembly
National Institute of Standards and Technology —
To better understand and address the challenges faced in linking all stages of a manufacturing and design process, an investigative fabrication process was designed... -
Federal
DICOM files for "RECIST and Volumetric CT Measurements of Injected-Water Phantoms" by ZH Levine, HH Chen-Mayer, AP Peskin, and AL Pintar.
National Institute of Standards and Technology —
DICOM files are given for 11 CT scans which were used in a research article. Each scan contains about 1250 slices with 512x512 gray scale images, each in its own... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
Life Cycle Assessment Models for Construction Materials
National Institute of Standards and Technology —
This dataset is a set of life cycle assessment (LCA) models for select construction materials that have been developed by the Applied Economics Office of the... -
Federal
Radio Access Network Anomalous State Detection Dataset
National Institute of Standards and Technology —
This project [1] produced two types of data: Working Data and Derived Data. The Working Data includes raw measurements collected from a Radio Access Network (RAN)... -
Federal
Uplink IQ Recordings
National Institute of Standards and Technology —
This data is provided as a supplement to NIST Technical Note 2159 Laboratory Method for Recording AWS-3 LTE Waveforms available at... -
Federal
Distributed Sensing of Radio Spectrum Occupancy Amid COVID-19
National Institute of Standards and Technology —
During the COVID-19 pandemic, National Institute of Standards and Technology (NIST) performed a targeted campaign of measurements of channel power and occupancy rate... -
Federal
High-Resolution X-ray computed tomography (XCT) image data set of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion processing parameters
National Institute of Standards and Technology —
This data contains X-ray computed tomography (XCT) reconstructed slices of additively manufactured cobalt chrome samples produced with varying laser powder bed fusion... -
Federal
FIZ/NIST Inorganic Crystal Structure Database (ICSD) - SRD 84
National Institute of Standards and Technology —
The Inorganic Crystal Structure Database (ICSD) is produced cooperatively by the Fachinformationszentrum Karlsruhe (FIZ) and the National Institute of Standards and... -
Federal
NIST/NIBIB Medical Imaging Phantom Lending Library
National Institute of Standards and Technology —
This database contains imaging and calibration data for phantoms contained in the NIST/NIBIB Phantom Lending Library (PLL). Description and access to the PLL can be... -
Federal
RGTM 10169
National Institute of Standards and Technology —
NIST developed a reference material consisting of synthetic fragments of the SARS-CoV-2 virus RNA, which is the target of molecular diagnostic tests. These RNA... -
Federal
LTE and Wi-Fi coexistence measurement data
National Institute of Standards and Technology —
This dataset provides RF data from software defined ratio (SDR) measurement results of a few cases: A. one 4G LTE link, B. two LTE links, C. one LTE link and one Wi-... -
Federal
SHREC'14 Track: Extended Large Scale Sketch-Based 3D Shape Retrieval
National Institute of Standards and Technology —
The objective of SHREC'14 Track is to evaluate the performances of different sketch-based 3D model retrieval algorithms using a large scale hand-drawn sketch query... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): 3D Scan Strategies
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing build performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on July... -
Federal
FIB SEM image data set of Caenorhabditis elegans exposed to 60 nm Au nanoparticles
National Institute of Standards and Technology —
This folder contains image data sets from 14 separate serial sectioning sessions. The entire data folder consists of 1379 8 bit tif images and is 47.3 GB in size.... -
Federal
X-ray computed tomography data of Additive Manufacturing Metrology Testbed (AMMT) parts: Overhang Part X4
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the four parts built as part of the "Overhang Part X4" in-situ... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
Department of Commerce —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element...