-
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
National Institute of Standards and Technology —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Data for manuscript: Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers
National Institute of Standards and Technology —
Experimental and modeling data for manuscript "Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers" by Chad Ropp, Dhriti Maurya, Alexander... -
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
National Institute of Standards and Technology —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
Data Set: Assessment of Martensitic Transformation Paths Based on Transformation Potential Calculations
National Institute of Standards and Technology —
This data set supports the technical paper and supporting information documents accepted to Steel Research International (https://doi.org/10.1002/srin.201800370). The... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Supplemental Data for "Constraining the decline of the lunar dynamo field at ? 3.1 Ga through paleomagnetic analysis of Apollo 12 mare basalts"
National Institute of Standards and Technology —
Supplemental data for the manuscript entitled "Constraining the decline of the lunar dynamo field at ? 3.1 Ga through paleomagnetic analysis of Apollo 12 mare... -
Federal
Single-track laser scan cross-sectional micrographs on IN625 and IN718 bare plates with melt pool depth and width measurements
National Institute of Standards and Technology —
Single-track laser scans were produced with Yb-fiber lasers on bare plates of IN625 and IN718 using three different laser powder bed fusion machines. The laser power,... -
Federal
AM Bench 2022 IN625 3D Build Microstructure Modeling Challenge Description Data (AMB2022-05)
National Institute of Standards and Technology —
The following data files are provided in support of the AM Bench 2022 modeling challenges associated with Microstructure measurement extension to AMB2018-01: laser...