-
Federal
Hydroshear Simulation Lab Test 2
Department of Energy —
This data file is for test 2. In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is applied. The max... -
Federal
Utah FORGE 5-2419: Seismicity-Permeability Relationships Probed via Nonlinear Acoustic Imaging - 2025 Workshop Presentation
Department of Energy —
This is a presentation on the Seismicity-Permeability Relationships Probed via Nonlinear Acoustic Imaging project by Pennsylvania State University, presented by Derek... -
Federal
Utah FORGE: 2023 Large Upscaled Discrete Fracture Network Models
Department of Energy —
This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team... -
Federal
Stimulation at Desert Peak -Modeling with the Coupled THM Code FEHM
Department of Energy —
Numerical modeling of the 2011 shear stimulation at the Desert Peak Well 27-15 using a coupled thermal-hydrological-mechanical simulator. This submission contains the... -
Federal
Utah FORGE: 2023 Phase 3B Year 1 Annual Report
Department of Energy —
This report discusses the objectives, goals, accomplishments and results of Phase 3B Year 1 of the Utah FORGE project. The report includes infrastructure, seismic... -
Federal
Utah FORGE: Well 16A(78)-32 Stimulation Tracer Test Results
Department of Energy —
This archive contains data from the tracer test performed during the Utah FORGE well 16A(78)-32 stimulation. This includes: 1. the raw data file from Pason in the csv... -
Federal
Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores - Geomechanical Packer Formation Model Iteraction
Department of Energy —
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by... -
Federal
StimuFrac Compressibility as a Function of CO2 Molar Fraction
Department of Energy —
Compressibility values were obtained in a range of pressures at 250degC by employing a fixed volume view cell completely filled with PAA aqueous solution and... -
Federal
EGS Collab: Hydraulic Fracturing Test Measurements on the 4100L of SURF
Department of Energy —
This package includes data from two days of testing at the Sanford Underground Research Facility (SURF) on the 4100 level. The tests were performed in borehole TV4100... -
Federal
EGS Collab Experiment 2: Hydraulic Pressure Test Results
Department of Energy —
The EGS Collab experiment 2 was focused on testing shear stimulation techniques. Shear stimulation, in this case, means using hydraulic pressure to cause shear slip... -
Federal
EGS Collab Experiment 1: Well Locations and Orientations.
Department of Energy —
The EGS Collab is conducting experiments in hydraulic fracturing at a depth of 1.5 km in the Sanford Underground Research Facility (SURF) on the 4850 Level. A total... -
Federal
EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper
Department of Energy —
Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have... -
Federal
Utah FORGE 3-2417: Pulsed Interference Tests at Wells 16A(78)-32 and 16B(78)-32 - September 2024
Department of Energy —
This archive contains data and a report from Pulse Interference Tests (PITs), which were conducted on September 4, 2024, immediately following a 30-day recirculation... -
Federal
Utah FORGE 3-2514: A Strain Sensing Array to Characterize Deformation at the FORGE Site - Workshop Presentation
Department of Energy —
This is a presentation on the Strain Sensing Array to Characterize Deformation at the FORGE Site project by Clemson University, presented by Lawrence Murdoch. The... -
Federal
Utah FORGE: Phase 2C Topical Report
Department of Energy —
This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview;... -
Federal
EGS Collab Experiment 1: Circulation Testing
Department of Energy —
These data and test descriptions comprise a chilled circulation test conducted at the 164' fracture in the EGS Collab Experiment 1 testbed on the 4850 ft level of the... -
Federal
Utah FORGE: Well 58-32 Injection Test Data
Department of Energy —
This submission contains pressure and flow time series data from the reservoir testing of Well 58-32. These activities were part of the Utah FORGE Phase 2B site... -
Federal
EGS Collab Experiment 1: Baseline Cross-well Seismic
Department of Energy —
As part of the geophysical characterization suite for the first EGS Collab tesbed, here are the baseline cross-well seismic data and resultant models. The campaign...