-
Federal
Advanced Control Systems for Wave Energy Converters
Department of Energy —
This submission contains several papers, a final report, descriptions of a theoretical framework for two types of control systems, and descriptions of eight real-time... -
Federal
HydroAir Power Take Off Combined Design Report
Department of Energy —
The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications... -
Federal
Hawaii Wave Surge Energy Converter (HAWSEC) OSU O.H. Hinsdale Basin
Department of Energy —
The following information and metadata applies to both the Phase I (Hydrodynamics) and Phase II (Full System Power Take-Off) zip folders which contain testing data... -
Federal
LCOE Content Model for the Heaving Point Absorber Buoy
Department of Energy —
This is the LCOE analysis spreadsheet and content model for the heaving point absorber buoy developed for controls purposes. The cost assessment was done on a wave-... -
Federal
Wave Carpet Controls Design Optimization
Department of Energy —
To assess CalWave's submerged Wave Carpet Technology for system performance advancement, CalWave seeks to test advanced controls methodologies on a simplified wave... -
Federal
Risk Management Plan and Risk Register for Design Low-Power Wave Energy Converter for Non-Grid Applications
Department of Energy —
Risk Registers for major subsystems completed according to the methodology described in the Risk Management Plan [DE-EE0008627 D1.2 Risk Management Plan PD v1.1... -
Federal
Laboratory Experiments for Highly Nonlinear WEC-Wave Conditions
Department of Energy —
This document describes the experiments carried out in December 2019 and February-March 2020 in the Directional Wave Basin at the O.H. Hinsdale Wave Research... -
Federal
Specified System Requirements for the HydroAir Power Take Off System
Department of Energy —
Includes Annual Energy Production of the system, Target Availability of the system, the system's PWR (power to weight ratio), Critical Dimensions and Weights (e.g.... -
Federal
TEAMER: Heterogeneous Wave Energy Converter Test Data
Department of Energy —
This dataset was generated during the Heterogeneous Wave Energy Converter (HetWECs) experimental campaign conducted at the O.H. Hinsdale Direction Wave Basin at... -
Federal
Triton-C WEC Numerical and LCOE Content Models (DDP)
Department of Energy —
These are the Content Models for the Triton-C multi-mode point absorber WEC based on the Detailed System Design Package (DDP), including WEC Numerical and LCOE... -
Federal
StingRAY WEC Risk Register
Department of Energy —
Risk Registers for major subsystems of the StingRAY WEC completed in compliance with the DOE Risk Management Framework developed by NREL. -
Federal
TEAMER: Laboratory Evaluation of Dual-Function Oscillating Water Column with Slotted Breakwater - O.H. Hinsdale Wave Research Laboratory
Department of Energy —
This dataset documents a series of controlled laboratory experiments conducted at the O.H. Hinsdale Wave Research Laboratory to evaluate the performance of a dual-... -
Federal
UMass 2-Body WEC Techno-Economic Assessment
Department of Energy —
The University of Massachusetts (UMass) is developing a 2-body wave energy converter (WEC) device that is converting mechanical power into electricity using a... -
Federal
CalWave Open Water Demo - Budget Period 1 Reports
Department of Energy —
The objective of the project is to advance the Technology Readiness Level (TRL) of the Wave Energy Converter (WEC) developed by CalWave Wave Power Technologies Inc... -
Federal
TEAMER: Numerical Model of IProTech PIP WEC Device
Department of Energy —
iProTech PIP wave energy converter (WEC) is a slack moored, single hull device with no moving parts in the water, joints or bearings. This submission includes data of... -
Federal
Direct-Drive Electrical Generator and PTO System for Flap-type Wave Energy Converters
Department of Energy —
Project and generator specifications and initial prototype test data for flap-type wave energy converters (WEC) -
Federal
LandRAY PTO Testing Utilizing the NREL NWTC 5MW Dynamometer
Department of Energy —
The overarching project objective is to demonstrate the feasibility of using an innovative PowerTake-Off (PTO) Module in Columbia Power's utility-scale wave energy... -
Federal
StingRAY Updated WEC Risk Registers
Department of Energy —
Updated Risk Registers for major subsystems of the StingRAY WEC completed according to the methodology described in compliance with the DOE Risk Management Framework... -
Federal
CalWave Revised IO&M Plan - CalWave Open Water Demo
Department of Energy —
Revised IO&M Plan for CalWave's open water demonstration at Scripps Institution of Oceanography for the open water demonstration to be conducted in collaboration...