238 datasets found for "Temperature"
-
Federal
NIST-JANAF Thermochemical Tables - SRD 13
National Institute of Standards and Technology —
The Fourth Edition to the NIST-JANAF Thermochemical Tables has been assembled under the sponsorship of the Standard Reference Data Program at the National Institute... -
Federal
NIST/ASME Steam Properties Database - SRD 10
Department of Commerce —
The NIST/ASME Steam Properties Database is based upon the International Association for the Properties of Water and Steam (IAPWS) 1995 formulation for general and... -
Federal
NIST Chemical Kinetics Database
National Institute of Standards and Technology —
The NIST Chemical Kinetics Database includes essentially all reported kinetics results for thermal gas-phase chemical reactions. The database is designed to be... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
National Institute of Standards and Technology —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
NIST ITS-90 Thermocouple Database - SRD 60
National Institute of Standards and Technology —
This database reproduces a subset of the tables and reference functions of NIST Monograph 175, 'Temperature Electromotive Force Reference Functions and Tables for the... -
Federal
Degradation Measurement of Robot Arm Position Accuracy
National Institute of Standards and Technology —
The dataset contains both the robot's high-level tool center position (TCP) health data and controller-level components' information (i.e., joint positions,... -
Federal
NIST/ASME Steam Properties Database - SRD 10
National Institute of Standards and Technology —
The NIST/ASME Steam Properties Database is based upon the International Association for the Properties of Water and Steam (IAPWS) 1995 formulation for general and... -
Federal
NIST alloy data
National Institute of Standards and Technology —
The NIST Alloy data web application (https://trc.nist.gov/metals_data) provides access to thermophysical property data with a focus on unary, binary, and ternary... -
Federal
Dynamic compressive stress-strain curves of aluminum alloy 6061-T6 with rapid heating
National Institute of Standards and Technology —
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy... -
Federal
NIST Thermophysical Properties of Hydrocarbon Mixtures Database- SRD 4
National Institute of Standards and Technology —
SUPERTRAPP is an interactive computer program for predicting thermodynamic and transport properties of pure fluids and fluid mixtures containing up to 20 components.... -
Federal
NIST Database of the Thermophysical Properties of Gases Used in the Semiconductor Industry
National Institute of Standards and Technology —
The 1999 Semiconductor Industry Association (SIA) International Technology Roadmap for Semiconductors (ITRS) identifies 'Equipment Modeling' as first in a list of... -
Federal
NIST Campus Photovoltaic (PV) Arrays and Weather Station Data Sets
National Institute of Standards and Technology —
One-minute averaged values and one-second instantaneous values for 2015 through 2018 for three grid-connected photovoltaic arrays on the NIST campus in Gaithersburg,... -
Federal
In Situ Thermography of Single Scan Tracks Performed on Nickel Super Alloy 625 for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018): Powder Bed Fusion Commercial Build Machine
National Institute of Standards and Technology —
These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
JARVIS: Joint Automated Repository for Various Integrated Simulations
National Institute of Standards and Technology —
JARVIS (Joint Automated Repository for Various Integrated Simulations) is a repository designed to automate materials discovery using classical force-field, density... -
Federal
Experimental data sets for viscosity and surface tension of binary mixtures at the temperatures (293.15 to 323.15) K and the pressures (99.325 to 103.325) kPa
Department of Commerce —
This is a research data set extracted from NIST Standard Reference Database 103b and contains raw experimental data for viscosity and surface tension of binary mixtures. -
Federal
Experimental data sets for viscosity and surface tension of binary mixtures at the temperatures (293.15 to 323.15) K and the pressures (99.325 to 103.325) kPa
National Institute of Standards and Technology —
This is a research data set extracted from NIST Standard Reference Database 103b and contains raw experimental data for viscosity and surface tension of binary mixtures. -
Federal
Time Series Data from Sensors in the Duct Above a Kitchen Cooktop During Normal Cooking and Ignition Conditions
National Institute of Standards and Technology —
This data set includes the time series data from 16 electrochemical, optical, temperature and humidity sensors in 60 experiments to characterize the conditions...
238 datasets found for "Temperature"