43 datasets found for "ag真人挂机软件✅澳门葡京赌场官方网站-网址【079.one】㊙️最火爆PG电子超高爆奖率，注册即送38元.AcwpQgAmCF"
-
Federal
Thermal Drift Monitoring Experiment 01
National Institute of Standards and Technology —
An experiment was set up within a machine tool at the National Institute of Standards and Technology (NIST) to test vision-based thermal drift tracking methods. A... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): RHF Experiment
National Institute of Standards and Technology —
This dataset includes the files pertaining to a 3D additive manufacturing experiment performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung on... -
Federal
Linear Axis Testbed at IMS Center - Run-to-Failure Experiment 01
National Institute of Standards and Technology —
A linear axis testbed at the Center for Intelligent Maintenance Systems (IMS Center) at the University of Cincinnati was run to failure (the detection of backlash)... -
Federal
Open Media Forensics Challenge (OpenMFC) Evaluation Datasets
National Institute of Standards and Technology —
The datasets contain the following parts for Open Media Forensics Challenge (OpenMFC) evaluations:1. NC16 Kickoff dataset2. NC17 development and evaluation datasets3.... -
Federal
Process and robot data from a two robot workcell representative performing representative manufacturing operations.
National Institute of Standards and Technology —
This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
National Institute of Standards and Technology —
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-... -
Federal
NIST DART-MS Forensics Database (is-CID)
National Institute of Standards and Technology —
The NIST DART-MS Forensics Database is an evaluated collection of in-source collisionally-induced dissociation (is-CID) mass spectra of compounds of interest to the... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
National Institute of Standards and Technology —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Cutting Force Monitoring Experiment 01
National Institute of Standards and Technology —
An experiment was set up at the University of Tennessee Knoxville (UTK) to test methods for estimating the cutting forces in real time within machine tools for any... -
Federal
AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718
National Institute of Standards and Technology —
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-... -
Federal
MCV QoE Mouth To Ear Latency Measurement Data
National Institute of Standards and Technology —
Mouth-to-ear (M2E) latency describes the time it takes speech input in a voice communication transmit device to be output from a receiving device, and has been... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
National Institute of Standards and Technology —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
AM Bench 2022 ASTM E8 Macroscale Tension at Different Strain Rates on As-built IN625
National Institute of Standards and Technology —
Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are... -
Federal
Additive Manufacturing Benchmark Test Series (AM-Bench) 2018 Test Descriptions
National Institute of Standards and Technology —
The Additive Manufacturing Benchmark Test Series (AM-Bench) is developing a continuing series of controlled benchmark tests, in conjunction with a conference series,... -
Federal
Genome In A Bottle - v2.0 Genome Stratifications (Deprecated)
National Institute of Standards and Technology —
These stratification BED files from the Global Alliance for Genomics and Health (GA4GH) Benchmarking Team and the Genome in a Bottle Consortium are intended as a... -
Federal
X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: Overhang Part X16
National Institute of Standards and Technology —
This dataset includes files generated from post-build X-ray computed tomography (XCT) measurements of the sixteen parts built as part of the "Overhang Part X16" in-... -
Federal
Effects of as-built surface with varying number of contour passes on high-cycle fatigue behavior of additively manufactured nickel alloy 718
National Institute of Standards and Technology —
Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a... -
Federal
Neural Network Calculator for Designing Trojan Detectors
National Institute of Standards and Technology —
This is software that has the purpose of a web-based interactive neural network (NN) calculator with a NN inefficiency measurement. The software has been developed...
43 datasets found for "ag真人挂机软件✅澳门葡京赌场官方网站-网址【079.one】㊙️最火爆PG电子超高爆奖率，注册即送38元.AcwpQgAmCF"