-
Federal
Utah FORGE: Drilling Data for Student Competition
Department of Energy —
Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to... -
Federal
Utah FORGE: Well 58-32 Injection Test Data
Department of Energy —
This submission contains pressure and flow time series data from the reservoir testing of Well 58-32. These activities were part of the Utah FORGE Phase 2B site... -
Federal
Utah FORGE: Geologic, Topographic, and Other Related Maps and GIS Data from the Earth Model
Department of Energy —
This submission contains a number of maps and shapefiles related to the Utah FORGE site. Examples include geologic maps (several variations) and GIS data for the Utah... -
Federal
EGS Collab Experiment 1: Second Set Tracer Test Results
Department of Energy —
The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ... -
Federal
Snake River Plain FORGE: Well Data for INEL-1
Department of Energy —
Well data for the INEL-1 well located in eastern Snake River Plain, Idaho. This data collection includes caliper logs, lithology reports, borehole logs, temperature... -
Federal
Utah FORGE: Well Data for Student Competition
Department of Energy —
Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met... -
Federal
Compatibility Study of Nanofiltration and Reverse Osmosis Membranes with 1 Cyclohexylpiperidenium Bicarbonate Solutions
Department of Energy —
The switchable polarity solvent forward osmosis (SPS FO) desalination process requires use of a polishing filtration step to remove trace quantities of draw solution... -
Federal
EGS Collab Experiment 2: Preliminary Test Wells Locations and Orientations
Department of Energy —
The EGS Collab project is evaluating a site for Experiment 2 (hydraulic fracturing/shearing) at a depth of 1.25 km in the Sanford Underground Research Facility (SURF)... -
Federal
Machine Learning-Assisted High-Temperature Reservoir Thermal Energy Storage Optimization: Numerical Modeling and Machine Learning Input and Output Files
Department of Energy —
This data set includes the numerical modeling input files and output files used to synthesize data, and the reduced-order machine learning models trained from the... -
Federal
Snake River Plain FORGE: Site Characterization Data
Department of Energy —
The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory... -
Federal
Economic Impact of Permitting Timelines on Produced Geothermal Power
Department of Energy —
Despite having a large geothermal power potential in the United States, only a small fraction has been developed for power generation. Various barriers, including... -
Federal
Utah FORGE: Phase 3 Native State Model - 2022 Update
Department of Energy —
This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain... -
Federal
Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data
Department of Energy —
This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log... -
Federal
EGS Collab Experiment 1: Well Locations and Orientations.
Department of Energy —
The EGS Collab is conducting experiments in hydraulic fracturing at a depth of 1.5 km in the Sanford Underground Research Facility (SURF) on the 4850 Level. A total... -
Federal
EGS Collab Experiment 1: Tracer data tests
Department of Energy —
This file contains the first set of tracer data for the EGS Collab testbed. The first set of tracer tests were conducted during October-November, 2018. We have... -
Federal
Utah FORGE: Well 16A(78)-32 Planned Trajectory
Department of Energy —
This submission includes an Excel spreadsheet containing the Utah FORGE deep well 16A(78)-32 planned trajectory including UTM coordinates, elevations, and depths from... -
Federal
Utah FORGE: Data for 3-D Model Development - Lithology, Temperature, Pressure, and Stress
Department of Energy —
This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files... -
Federal
Utah FORGE: Phase Native State FALCON Model Files
Department of Energy —
The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement...