-
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
RF Dataset of Incumbent Radar Systems in the 3.5 GHz CBRS Band
Department of Commerce —
The RF dataset can be used to develop and test detection algorithms for the 3.5 GHz CBRS or similar bands where the primary users of the band are federal incumbent... -
Federal
Experimental data sets for viscosity and surface tension of binary mixtures at the temperatures (293.15 to 323.15) K and the pressures (99.325 to 103.325) kPa
Department of Commerce —
This is a research data set extracted from NIST Standard Reference Database 103b and contains raw experimental data for viscosity and surface tension of binary mixtures. -
Federal
Inventory of Community Resilience Indicators & Assessment Frameworks
Department of Commerce —
This dataset is an inventory of existing quantitative resilience frameworks, indicators, and measures that have been evaluated and entered into a database according... -
Federal
3D shape and size data for 10084 and 14163 lunar regolith particles
Department of Commerce —
This database contains 3D shape and size data for 10084 (Apollo 11) and 14163 (Apollo 14) real lunar regolith particles, along with STL files for the approximately... -
Federal
Data for "Increased Efficiency in Planar Near-Field Scanning Using Combined Multi-Robot Motion"
Department of Commerce —
Included here is relevant data to the publication "Increased Efficiency in Planar Near-Field Scanning Using Combined Multi-Robot Motion". Robotic antenna ranges are... -
Federal
Experimentally Generated Randomness Certified by the Impossibility of Superluminal Signals
Department of Commerce —
Random numbers are an important resource for applications such as numerical simulation and secure communication. However, it is difficult to certify whether a... -
Federal
Optical scattering measurements and simulation data for one-dimensional (1-D) patterned periodic sub-wavelength features
Department of Commerce —
This data set consists of both measured and simulated optical intensities scattered off periodic line arrays, with simulations based upon an average geometric model... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
Supplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal Powders" by E.J. Garboczi and N. Hrabe
Department of Commerce —
Supplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal... -
Federal
Digitized boundary and scanning isotherms from "The Thermodynamics and Hysteresis of Adsorption" by A. J. Brown, PhD Dissertation, University of Bristol (UK), 1963
Department of Commerce —
The dissertation "The Thermodynamics and Hysteresis of Adsorption" by A. J. Brown, contains unique measurements of adsorption/desorption isotherms of Xenon, Krypton,... -
Federal
Data for: "Apportionment and Inventory Optimization of Agriculture and Energy Sector Methane Emissions using Multi-month Trace Gas Measurements in Northern Colorado"
Department of Commerce —
This dataset contains 1) the methane, ethane, ammonia, and water mixing ratio time series recorded at the Platteville Atmospheric Observatory site, 2) the hourly mean... -
Federal
Smartphone Data for Development of Indoor Localization Apps
Department of Commerce —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... -
Federal
precisionFDA Truth Challenge V2: Calling variants from short- and long-reads in difficult-to-map regions
Department of Commerce —
The precisionFDA Truth Challenge V2 aimed to assess the state-of-the-art of variant calling in difficult-to-map regions and the Major Histocompatibility Complex... -
Federal
Dataset for Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment
Department of Commerce —
This data is associated with the manuscript titled Radio-Frequency Fingerprinting Millimeter-Wave Commercial Off-the-Shelf Cellular User Equipment. The abstract of... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
Department of Commerce —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Overhang Part X16
Department of Commerce —
This dataset includes files from the experiment titled OverhangPartX16 pertaining to a three-dimensional (3D) additive manufacturing (AM) build performed on the... -
Federal
Calibration Data for Wafer 2 of SRM 3461 - MEMS Cantilever Stiffness
Department of Commerce —
SRM 3461 is an AFM sized chip with an array of seven cantilevers on each chip. The uniformity of the chips offered for sale from wafer 2 is excellent and the SRM... -
Federal
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Overhang Part X4
Department of Commerce —
This dataset includes files from the experiment titled 'OverhangPartX4' pertaining to a three-dimensional (3D) additive manufacturing (AM) build performed on the...