-
Federal
Utah FORGE 2-2446: Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity - 2025 Workshop Presentation
Department of Energy —
This is a presentation on the Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity project by Lawrence Livermore National Laboratory,... -
Federal
Walker Ranch 3D Seismic Images
Department of Energy —
Amplitude images (both vertical and depth slices) extracted from 3D seismic reflection survey over area of Walker Ranch area (adjacent to Raft River). Crossline... -
Federal
Brady 1D Seismic Velocity Model Ambient Noise Prelim
Department of Energy —
Preliminary 1D seismic velocity model derived from ambient noise correlation. 28 Green's functions filtered between 4-10 Hz for Vp, Vs, and Qs were calculated. 1D... -
Federal
Utah FORGE 5-2428: Fracture Permeability Impact on Reservoir Stress and Seismic Slip Behavior - 2025 Workshop Presentation
Department of Energy —
This is a presentation on the Fracture Permeability Impact on Seismic Slip Behavior project by Lawrence Livermore National Laboratory, presented by Dr. Kayla A.... -
Federal
Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core
Department of Energy —
This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD... -
Federal
Improved Microseismicity Detection During Newberry EGS Stimulations
Department of Energy —
Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key... -
Federal
Surface Complexation Modeling of Terbium Biosorption onto E. Coli Bacterial Surfaces with Lanthanide Binding Tags
Department of Energy —
Lanthanide binding tags (LBTs) have been engineered onto native Escherichia coli (E. coli) bacterial surfaces to enhance extraction and recovery of rare earth... -
Federal
Utah FORGE 2-2446: Connecting In Situ Stress and Wellbore Deviation to Near-Well Fracture Complexity using Phase-Field Simulations
Department of Energy —
This report presents a series of numerical experiments investigating the relationships among near-well fracture complexity, in situ stress conditions, and wellbore... -
Federal
Recovery of Rare Earth Elements from Geothermal Fluids through Bacterial Cell Surface Adsorption
Department of Energy —
We summarized the FY17 and part of FY18 results of the analysis of the effect of several parameters (e.g., total dissolved solids, specific competing metals, pH, and... -
Federal
Techno-Economic Assessment for Integrating Biosorption into Rare Earth Recovery Process
Department of Energy —
The current uncertainty in the global supply of rare earth elements (REEs) necessitates the development of novel extraction technologies that utilize a variety of REE... -
Federal
Utah FORGE: Well 16A(78)-32 Core-Flooding Experiment Results
Department of Energy —
This dataset contains core-flood experimental results from the Utah FORGE project, generated through laboratory tests at Lawrence Livermore National Laboratory. The... -
Federal
REE Adsorption Performance with Immobilized Caulobacter Biofilms
Department of Energy —
This submission includes data collected from experiments on the performance of rare earth adsorption by immobilized bacteria that accompany the FY18 Q2 and Q3 quarter... -
Federal
Thermal Drawdown Induced Flow Channeling in Fractured Geothermal Reservoirs: Rock Mechanics and Rock Engineering
Department of Energy —
We investigate the flow-channeling phenomenon caused by thermal drawdown in fractured geothermal reservoirs. A discrete fracture network-based, fully coupled thermal... -
Federal
Illite Dissolution Rates and Equation (100 to 280 deg C)
Department of Energy —
The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and... -
Federal
3D Seismic Reflection Attributes of a Geothermal Area
Department of Energy —
Images from a 3D seismic reflection survey across a geothermal area are shown. Images of coherency and acoustic impedance are shown. Well tracks and MEQ location are... -
Federal
Utah FORGE 2-2446: Characterizing Stress Roughness Through Simulation of Hydraulic Fracture Growth
Department of Energy —
This dataset covers work that investigated the apparent toughness anisotropy at Utah FORGE by comparing microseismic data with stress profiles from field... -
Federal
The Value of Spatial Information for Determining Well Placement
Department of Energy —
The article and accompanying spreadsheet represent the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value... -
Federal
Thermal Drawdown-Induced Flow Channeling in a Single Fracture in EGS
Department of Energy —
The evolution of flow pattern along a single fracture and its effects on heat production is a fundamental problem in the assessments of engineered geothermal systems... -
Federal
Conductance Steamflow Relationship
Department of Energy —
These histograms represent our calibration of conductance of a volcanic geothermal field (with a clay cap) and the observed steam flow rates. Darajat is a vapor... -
Federal
Using Fully Coupled Hydro-Geomechanical Numerical Test Bed to Study Reservoir Stimulation with Low Hydraulic Pressure
Department of Energy —
This paper documents our effort to use a fully coupled hydro-geomechanical numerical test bed to study using low hydraulic pressure to stimulate geothermal reservoirs...