-
Federal
Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling
Department of Energy —
Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from... -
Federal
Images of Fracture Sustainability Test on Stripa Granite
Department of Energy —
Images of the Stripa Granite core before and after the fracture sustainability test. Photos of fracture faces of Stripa Granite core. -
Federal
Reactive Transport Modeling of Aquifer Thermal Energy Storage System at Stockton, NJ
Department of Energy —
This is the modeling data (input/output files of TOUGHREACT 4.10) used to simulate the reactive transport processes of the Aquifer Thermal Energy Storage (ATES)... -
Federal
Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems
Department of Energy —
Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy... -
Federal
Cranfield Thermosiphon Test DTS Data
Department of Energy —
Thermal profile data acquired using Silixa Ultima Distributed Temperature Sensor (DTS) at Cranfield, MS field test -
Federal
WISE-CASING: Time Domain Reflectometry Data from Lab Experiment on Coaxial Cable
Department of Energy —
The coaxial-cable experiment conducted in the lab was with 80 m coaxial cable( RG-85). This experiment compares the TDR response between damaged and undamaged cable.... -
Federal
Utah FORGE 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone
Department of Energy —
This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE... -
Federal
Utah FORGE 3-2535: Report on Borehole EM Data Collection and Imaging with the VEMP Field System
Department of Energy —
This report outlines electromagnetic field measurements that were made after stimulation at Utah FORGE in May of 2024. The measurements involved lowering an electrode... -
Federal
Helium isotope study of Geothermal Features in Chile with Field and Laboratory Data
Department of Energy —
Helium isotope and stable isotope data from the El Tatio, Tinginguirica, Chillan, and Tolhuaca geothermal systems, Chile. Data from this submission are discussed in:... -
Federal
Kilauea Magnetotelluric Dataset
Department of Energy —
In 2002 and 2003 a collaborative effort was undertaken between Lawrence Berkeley National Laboratory, Sandia National Laboratories, the USGS Menlo Park, the USGS... -
Federal
Shear Induced Permeability Test: Stripa Granite X-Ray CT Files and Explanation
Department of Energy —
This folder contains X-ray CT images and an explanation related to the shear induced permeability testing of Stripa granite -
Federal
EGS Collab Experiment 2: Continuous Active Source Seismic Monitoring (CASSM)
Department of Energy —
The dataset contains continuous active-source seismic monitoring (CASSM) data collected during EGS Collab Experiment 2, conducted from February to September 2022 at... -
Federal
EGS Collab Experiment 2: Core Photographs and Descriptions
Department of Energy —
This submission contains photographs of rock core collected from EGS Collab Experiment 2 (and 3) boreholes. Cores were generally photographed in about 1-foot sections... -
Federal
WISE-CASING: Frequency Domain EM Data from Cymric Oil Field, CA
Department of Energy —
Cymric oil field frequency domain electromagnetic (FEM) data with two parts of data labeled Part 1 and Part 2. Part 1 utilizes an electrical source line parallel to... -
Federal
EGS Collab Experiment 2: Distributed Fiber Optic Acoustic Data (DAS)
Department of Energy —
Distributed fiber optic sensing was an important part of the monitoring system for EGS Collab Experiment #2. A single loop of custom fiber package was grouted into... -
Federal
Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Large Scale Grid
Department of Energy —
Mesh, properties, initial conditions, injection/withdrawal rates for modeling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from... -
Federal
EGS Collab Experiment 1: Continuous Active-Source Seismic Monitoring (CASSM) Data
Department of Energy —
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for... -
Federal
Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements
Department of Energy —
The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical... -
Federal
Utah FORGE: Stress Ratio Dependence of Ultrasonic Anisotropy in Well 16B(78)-32 Core
Department of Energy —
This dataset contains high-pressure ultrasonic measurements on a foliated granitoid core from Well 16B(78)-32 at the Utah FORGE site. Ultrasonic P-waves and two... -
Federal
Community Resilience through Low-Temperature Geothermal Reservoir Thermal Energy Storage
Department of Energy —
Submitted data include simulations related to underground thermal battery (UTB) simulations described in Modeling and efficiency study of large scale underground...